Filter
Top Products
Chapter 6: Using the TV’s features
43
Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.
To adjust the audio quality:
Press and open the Audio menu.
Highlight Audio Settings and press
.
Press T or S to highlight the item you want to adjust
(Bass, Treble, or Balance).
Press W or X to adjust the level.
W makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
X makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).
To save the new settings, highlight Done and press .
To reset the settings to the factory defaults, highlight
Reset and press .
Selecting the optical audio output format
You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the Optical Audio Out terminal on the
TV (see “Connecting a digital audio system” on page 17).
To select the optical audio output format:
Press and open the Audio menu.
Highlight Audio Setup and press
.
In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device.
To save the new settings, highlight Done and press
.
To revert to the factory defaults, highlight Reset and
press .
1
2
3
4
•
•
5
1
2
3
4
Using the Dolby
®
Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC dynamic
range to be further compressed, allowing you to switch from
ATSC to analog broadcasts at the same dynamic range.
To use the Dolby Digital Dynamic Range Control:
Press and open the Audio menu.
Highlight Audio Setup and press .
In the Dolby Digital Dynamic Range Control field, select
Compressed. When Standard is selected, the audio is
output with minimal compression.
To save the new settings, highlight Done and press .
To revert to the factory defaults, highlight Reset and
press .
Note:
This item will be grayed out for NTSC signals, Video,
ColorStream, and PC inputs.
The Dolby Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).
1
2
3
4
•
•