Panasonic 40RV52R Flat Panel Television User Manual


 
Chapter 6: Using the TV’s features
49
Item Description
Power Turns the select device on and off.
Top Menu Accesses the top menu of a DVD.
Menu Accesses the menu of a DVD.
Contents
Menu
Accesses the contents list when you press
. At this time, the REGZA-LINK Player Control
menu will disappear.
Note:
These functions depend on the devices that are connected.
The REGZA-LINK Player Control item will be grayed out in
the following conditions:
A non-HDMI input is currently selected.
The Enable REGZA-LINK item is set to Off.
The connected CEC device is not a playback or
recording device
.
REGZA-LINK
®
input source selection
If a REGZA-LINK device with HDMI switching capability
(e.g. Audio Receiver) is connected to the HDMI input, you
can select another REGZA-LINK device that is connected to
the master HDMI device using the TV’s INPUT button. See
page 33 for details.
VOLUME and MUTE controls of Audio
Receiver
With your TV’s remote control, you can adjust or mute the
sound volume of the Audio Receiver. First, set the MODE
SELECT switch on the remote control to TV.
adjust the volume level.
turns off the sound.
Note:
To use this function:
Set Speaker Preference to Audio Receiver in the
REGZA-LINK Setup menu.
Confirm that a connected REGZA-LINK device (such as
DVD player, etc) is selected for the Audio Receiver input
source.
You can also use this function when the audio receiver is
connected to the TV’s DIGITAL AUDIO OUT terminal (not
HDMI connection). In this case, select a digital audio input
mode on the Audio Receiver.
These functions depend on the device connected.
Other REGZA-LINK
®
functions
When the Enable REGZA-LINK and each item in the
REGZA-LINK Setup menu are set to On, the following
functions will be enabled.
Item Description
TV Auto
Input Switch
If a connected HDMI device starts playing
video or audio, the TV will automatically
switch to the appropriate HDMI input.
TV Auto Power
If a device is turned on, the TV turns on
automatically.
Device Auto
Standby
If the TV is turned off the TV will send
a message to turn off all of the devices
connected to the TV.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers or the
audio receiver speakers. When this item is
set to Audio Receiver, the TV remote can
be used to adjust or mute the volume of the
audio. This item will be grayed out unless
a REGZA-LINK compatible audio receiver
is connected.
Note: When you turn on the Audio Receiver, change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver’s speakers even if TV Speakers has
been selected. Turn the TV off and on again to output the
sound from the TV speakers.
To set the REGZA-LINK
®
Setup:
From the Setup menu, highlight REGZA-LINK Setup and
press .
Press S or T to highlight Enable REGZA-LINK.
Press W or X to select On.
Note: If you select Enable REGZA-LINK Off, the other items
will be grayed out.
Press S or T to highlight the REGZA-LINK Setup item
you want to use, and press W or X to select On or desired
mode.
TV Auto Input Switch: On/Off
TV Auto Power: On/Off
Device Auto Standby: On/Off
To save the new settings, highlight Done and press .
To revert to the factory defaults, highlight Reset and
press .
1
2
3
4
5