Panasonic AJ-HD1700PE VCR User Manual


 
117
This VTR is equipped with an auto head cleaning
function which automatically reduces the amount of
dirt on the video heads. In order to maximize the
VTR’s reliability, however, it is recommended that the
video heads be cleaned as and when appropriate.
For further details on how to actually clean the heads,
consult with one of Panasonic’s service companies or
with your dealer.
Video head cleaning
Condensation occurs due to the same principle which
is involved when droplets of water form on a window
pane of a heated room. It occurs when the VTR or
tape is moved between places where the temperature
or humidity varies greatly or when, for instance:
It is moved to a very humid place full of steam or a
room immediately after it has been heated up.
It is suddenly moved from a cold location to a hot or
humid location.
After moving the VTR to such a location, leave it
standing for about 10 minutes rather than switching on
its power immediately.
If condensation has formed on or in the VTR, the
AUTO OFF lamp lights, and the cassette tape is
automatically ejected. Keep the power supplied and
simply wait until the AUTO OFF lamp goes off.
It is recommended that the video heads be cleaned
after the AUTO OFF lamp has gone off.
Condensation
Before proceeding with maintenance, be absolutely
sure to set the power switch to OFF and take hold of
the power plug and unplug it from the power outlet.
Use a soft cloth to clean the cabinet. To remove
stubborn dirt, dilute some kitchen detergent, dip a
cloth into the solution, wring it out well, and wipe.
After having removed the dirt, take up any remaining
moisture using a dry cloth.
<Note>
Do not use alcohol, benzene, paint thinners or other
solvents. They can discolor the external parts
surfaces and remove the finish.
Maintenance