Panasonic AJ-HD1700PE VCR User Manual


 
130
[GENERAL]
indicates the safety information.
Power supply: AC 100–240V, 50–60 Hz (AJ-HD1700P)
AC 100–240V, 50–60 Hz (AJ-HD1700E)
Power consumption: 240W
Operating ambient temperature:
41
x
F to 104
x
F (5
x
C to 40
x
C)
Operating ambient humidity:
10% to 80% (no condensation)
Weight:
Approx. 48.4 lbs (22 kg)
Dimensions (W
k
H
k
D):
16-3/4 (max. 17-3/16 )
k
6-15/16
k
17-11/16 inches
(not including supporting feet, jacks and connectors, JOG
dial and fan)
424 (max. 435.4)
k
175.2
k
448.9 mm
Recording format:
DVCPRO HD-LP
Video signals recorded:
1080i (50/59.94/60 Hz switchable)
720p (59.94/60 Hz switchable)
480i/59.94 Hz
576i/50 Hz (when optional board AJ-UC1700G is installed)
Audio signals recorded:
48 kHz, 16 bits, 8 channels
Recording tracks:
Digital video/audio:
helical tracks
(Time code is recorded in sub-code area.)
Cue track:
1 track
Control track:
1 track
Tape speed:
67.64 mm/sec. (in 59.94 Hz mode)
67.70 mm/sec. (in 60 or 50 Hz mode)
Tape used:
Metal tape
Recording time:
126 minutes (using XL cassette)
92 minutes (using L cassette)
32 minutes (using M cassette)
FF/REW time:
Approx. 1 min. 30 sec. (when XL cassette is used and
i
100
k
or
j
100
k
speed is selected)
Search speed:
d
100
k
Digital slow:
j
1
k
to
i
2
k
(when playing back tapes recorded using the
DVCPRO HD-LP format)
j
1
k
to
i
1.1
k
(when playing back tapes recorded using
any other format)
Editing accuracy:
d
0 frames (when time code is used, in 50 Hz, 59.94 Hz or
60 Hz mode)
Tape timer accuracy:
d
1 frame (when continuous CTL signal is used)
Servo lock time:
Less than 0.3 sec. (from standby ON)
Specifications
[VIDEO]
Sampling frequencies:
Y: 74.25 MHz, Pb/Pr: 37.125 MHz
Quantizing:
8 bits
Video compression method:
DCT
i
variable length code
Video compression rate:
1/6.7
Error correction:
Reed-Solomon product code
Video recording bit rate:
100 Mbps
Video Input Connectors
HD serial digital input:
BNC
k
1 (complies with SMPTE 292M standard),
BNC
k
1 (active-through)
SD serial digital input (option):
BNC
k
1 (complies with SMPTE 259M-C standard),
BNC
k
1 (active-through)
SDTI input (option):
BNC
k
1 (complies with SMPTE 305M/SMPTE 321M
standards)*
HD reference input:
BNC
k
2 (loop-through), 75
ON/OFF selectable
SD reference input:
BNC
k
2 (loop-through), 75
ON/OFF selectable
Video Output Connectors
HD serial digital output:
BNC
k
3 (complies with SMPTE 292M standard),
BNC
k
1 (monitor output with superimposed display)
SD serial digital output:
BNC
k
1 (complies with SMPTE 259M-C/SMPTE 294M
standards),
BNC
k
1 (monitor output with superimposed display)
SDTI output (option):
BNC
k
1 (complies with SMPTE 305M/SMPTE 321M
standards)
HD reference output:
BNC
k
1
SD reference output:
BNC
k
1
Analog composite output:
BNC
k
3, VIDEO 1, VIDEO 2 (WFM OUT), VIDEO 3
(superimposed ON/OFF), output during SD playback or
during down-conversion
* The optional AJ-UC1700G SD serial digital input board and
optional AJ-YAC150P SDTI input board cannot be installed at
the same time. Install one or the other.
Loading time:
Approx. 4 sec.
Audio split editing:
Provided