Panasonic AJ-HD1200AP VCR User Manual


 
38
152 HUMID OPE
0000
0001
OFF
ON
For setting the units operation when condensation has formed.
0: The unit does not operate when condensation has formed.
1: It operates even when condensation has formed but no guarantees are made
that the operation will be trouble-free.
<Note>
Since operating the unit when condensation has formed may damage the tape or
give rise to other trouble, the 0 setting (no operation) is recommended under
normal circumstances.
OPERATION
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of settings
Setup menus
115 EJECT SW INH
0000
0001
REC
OFF
For setting whether to restrict the operation of the EJECT button on the front panel.
0: Operation is inhibited while the unit is in the recording mode.
1: The EJECT button can be operated in all operation modes.
118 SP MODE INH
0000
0001
OFF
ON
For selecting whether to enable or disable recording on a tape which has been
recorded using a format other than DVCPRO HD-LP.
0: Recording onto the cassette tape is enabled.
1: Recording onto the cassette tape is disabled.
150 SEARCH SPEED
0000
0001
X4.1
X8.4
For setting the search still, cue and review speed.
0: 4.1k normal tape speed
1: 8.4k normal tape speed
154 AUTO BACK
0000
0001
0002
OFF
REC-P
ALL
For setting how the follow-on recording function is to be used.
(For setting the AUTO BACK function operation which rewinds the tape for several
seconds in order to ensure that the video images follow on one from another with
no disruptions.)
0: The tape is not rewound automatically (no AUTO BACK).
1: The tape is rewound (AUTO BACK) during REC PAUSE, and it then stops in the
recording standby status. (When PAUSE is released, the tape runs up, and
recording starts.)
2: In addition to the function of the 0001 REC-P setting, the tape is rewound
(AUTO BACK) during REC PLAY, the tape immediately runs up, and recording
starts.
160 MEMORY MODE
0000
0001
0002
0003
OFF
M-STOP
REPT1
CONT
For setting the repeat playback mode.
0: No repeat playback (normal operation).
1: The tape stops near the BEGIN point when it is fast forwarded or rewound.
2: When the tape reaches the END point, it is rewound to the BEGIN point, and
stops.
3: When the tape reaches the END point, it is rewound to the BEGIN point, and
plays back, and this is done repeatedly.
114 REC INH LAMP
0000
0001
LIGHT
FLASH
For setting the operation of the REC INHIBIT lamp when the cassette is set to the
erasure prevention status.
0: The lamp lights.
1: The lamp flashes.
<Note>
When the REC INHIBIT switch on the front panel is set to ON, the REC INHIBIT
lamp lights at all times regardless of what setting is selected for this menu item.
112 FRZ MODE SEL
0000
0001
DIS
STBOFF
For setting the video output when the mode is transferred from playback images to
standby OFF (half loading).
0: The video output is muted.
1: When the standby OFF (half loading) mode is established, the image played
back at that moment is frozen and output.
indicates the factory setting.
110 AUTO REW
0000
0001
OFF
ON
For setting whether the tape is to be automatically rewound to its beginning when
the tape end is detected.
0: The tape is not rewound.
1: The tape is rewound to its beginning.