Filter
Top Products
- 10 -
SYSTEM SET UP menu
(Refer to the setting flowchart and output status tables on pages 144 and 145.)
As indicated in the procedures below, select the system frequency, video recording format, audio recording
format, and output formats for the output connectors to set the system format.
The underlining indicates the default setting.
* The FREQ setting is acknowledged only in the status where the cassette has been ejected.
If an attempt has been made to change this setting while a cassette is still inserted, the “EJECT CASSETTE TO
CHANGE FORMAT” message appears to warn the user to eject the cassette first.
Key Key designation Description
F1 FREQ*
For selecting the SYSTEM
Frequency.
For selecting the system frequency.
When the F1 key is pressed, the frequency selection window is opened.
The frequency can now be selected using the cursor keys.
59.94: The 59.94 Hz system is selected.
23.98
: The 23.98 Hz system is selected.
24: The 24 Hz system is selected.
50: The 50 Hz system is selected.
25: The 25 Hz system is selected.
The selection is entered by pressing the ENT key.
When the frequency setting has been selected, the video recording
format selection window is opened.
When the 23.98 or 24 setting has been selected, the selection window
which is 2K SYSTEM Format setting of H Sample is opened.
F3 VIDEO
For selecting the video
recording format.
For selecting the video recording format.
When the F3 key is pressed, the video recording format selection
window is opened. Use the cursor keys to select the format.
In a set system frequency of “23.98” or “24”, select the format in the
following menu.
1080PsF
: The 1080PsF recording format is selected.
1080p: The 1080p recording format is selected.
2048 (PsF): The 2K system format of 2048 (PsF) 4:4:4 is selected.
1920 (PsF): The 2K system format of 1920 (PsF) 4:4:4 is selected.
To enter the selection, press the ENT key.
When the 1920 (PsF) or 2048 (PsF) setting has been selected, the
COLOR SPACE selection window is opened.
F5 HD SDI
(When the 2K system mode is
selected, this is displayed in
the window but cannot be
selected or set.)
F6 HD MONI
(When the 2K system mode is
selected, this is displayed in
the window but cannot be
selected or set.)
F7 SD SDI
(When the 2K system mode is
selected, this is displayed in
the window but cannot be
selected or set.)
F10 COLOR SPACE For selecting the color space used when 2K SYSTEM mode is selected.
RGB
: RGB color space is selected.
XYZ: XYZ color space is selected.