Filter
Top Products
51
No./Item Description
802
TELETEXT
SEL
For selecting the type of teletext signals to be
recorded.
0000 MOJI
: MOJI system
0001 NABTS
: NABTS system
<Note>
VITC signals are often mistakenly detected as
teletext signals when the NABTS system has
been selected.
If this happens, select MANU as the setting for
setup menu No. 803 (TELETEXT DET), then
select the line for teletext signals.
Setup menus
The underlined items indicates the initial setting.
USER menu
<V BLANK>
No./Item Description
800
ADD LINE
00
REC LINE1
Sub-screen
For selecting the mode for recording signals
on additional lines.
0000 OFF
: No signals are recorded on
additional lines.
0001 YC422
: The 422 mode signals are
recorded on 1 line.
0002 YC411
: The 411 mode signals are
recorded on 1 line.
0003 Y1_B/W
: Only the Y signal is recorded on
1 line directly.
0004 Y1_BPF
: Only the Y signal is recorded on
1 line after it has been separated
from the C signal.
0005 C1
: Only the C signal is recorded on
1 line.
0006 Y2_B/W
: Only the Y signal is recorded on
2 lines directly.
0007 Y2_BPF
: Only the Y signal is recorded on
2 lines after it has been
separated from the C signal.
0008 C2
: Only the C signal is recorded on
2 lines.
<Note>
OWhen a setting from “0001 (YC422)” to “0008
(C2)” is selected and the STOP button is
pressed, operation transfers to the sub-screen,
and the recording line or lines can be selected.
To return from the sub-screen, press the STOP
button again.
For selecting the additional line where the
signals are to be recorded.
0000 10L
::
0012 22L
0013 263L
0014 273L
::
0025 284L
0026 525L
01
REC LINE2
For selecting the additional line where the
signals are to be recorded.
0000 10L
::
0012 22L
0013 263L
0014 273L
::
0016 275L
::
0025 284L
0026 525L
<Note>
This menu item is not displayed when additional
line mode setting “1” through “5” has been
selected.