Filter
Top Products
5
Adjustments
Viewfinder tilting
Move the locking lever on the mechanism section of the
main unit’s bottom panel in the counterclockwise (release)
direction, tilt the viewfinder to the desired angle, and move
the lever in the locking direction to lock it at this angle.
Viewfinder panning
The pan lock lever can be found behind the mechanism
section.
≥ When the lever is moved counterclockwise, the top of the
mechanism section can be rotated. Move the lever
clockwise to lock the mechanism section in place.
≥ The viewfinder can be panned to any angle from +90o to
–90o.
Tilt operation center
Release direction
Locking
lever
Locking direction
Pan
locking
lever
Attaching and removing the hood
1 Align the holes in the protruding part of the hood with the
two anchoring screws at the top of the main unit, slide
the hood downward, and anchor its top.
≥ The hood is anchored to the bottom of the main unit using
the anchoring screws at the bottom of the hood.
≥ The front of the hood can be moved upward.
Anchoring
screw
Slide the hood downward,
and anchor its top.
Viewfinder operations
Hood