Filter
Top Products
Using the AV-HS04M7D Option Board Enables 3D Video Production on the AV-HS450.
R
Extraordinary 3D stereoscopic chroma keying can be achieved onsite, in real
time, using the embedded multi-layer Primatte
®
compositing firmware.
Stereoscopic 3D chroma key compositing
3D video signal status monitor displays
The 3D video and 3D video signal status monitor can be displayed together in PGM output and PVW output of the multi-view display
(1/4 size only), enabling smoother 3D switching while checking the “protrusion” and “depth” differences between PGM and PVW.
Additionally, this screen can be fed back to the camera side, and adjustments such as the brightness and horizontal/vertical positioning
correction can be easily applied. These functions may be particularly useful when used to provide visual feedback to camera and rig operators.
R
L
R
L
R
L
●
Primatte
®
is a registered trademark of IMAGICA DIGIX Inc.
●
The copyrights of Primatte
®
belong to IMAGICA DIGIX Inc.
●
The patents for Primatte
®
belong to IMAGICA DIGIX Inc.
Ten Split Pictures (LRMIXa Image)
●
AV-HS450 manufactured before February 2011 requires a software version upgrade to use AV-HS04M7D. Contact a local sales outlet for details.
●
AV-HS04M7D can only be
mounted to AV-HS450 slot B. It will not operate even in 2D mode if mounted to slot A.
●
AV-HS04M7D is not compatible with AV-HS400/HS400A.
Histogram of amount of parallax (L ch and R ch)
Amount of parallax
Approx.
-7.5 %
Approx.
-3 % 0 %
Approx.
+3 %
Approx.
+7.5 %
Signal component level
(luminance, R, G and B)
HigherLower
Higher Lower
Bar used for input signal (L ch and R ch) compensation
Grid
Lum, Red, Green, Blue Prllx
●
Distribution of Lch and Rch signal components
●
Distribution of amount of parallax in 3D images
●
A grid is displayed at intervals of about 3 % along
the width of the screen.
Distribution
amounts of levels
Higher Lower
Distribution of
amount of parallax
Green display area:
Indicates a distribution with many L ch components.
Red display area:
Indicates a distribution with many R ch components.
Select LRMIXa or LRMIXb as the 3D output format,
and shoot so that the amount of parallax between Lch
and Rch come within the grid width.
Recessed
direction
Jutting out
direction
7