Filter
Top Products
18 Installation
Installation
3
Connecting to an
Amplifier
Make one of the following connections,
depending on the capabilities of your existing
equipment.
• HDMI Audio connection
• Digital Audio connection (page 19)
• 2CH Analog Audio connection (page 19)
Since many factors aect the type of audio
output, see “Audio Output Specications” for
details (pages 56-57).
About Digital Multi-channel sound
A digital multichannel connection provides the
best sound quality. For this, you need a multi-
channel Audio/Video Receiver that supports
one or more of the audio formats supported by
your player. Check the receiver manual and the
logos on the front of the receiver. (PCM Stereo,
PCM Multi-Ch, Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, DTS and/or DTS-HD)
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplier using
a HDMI cable. You will need to activate the
player’s digital output. (See “[AUDIO] Menu” on
pages 27-28.)
HDMI Connection
HDMI cable
HDMI cable
TV
Receiver/Amplier
BD Player
Connect the amplier’s HDMI output jack to
HDMI input jack on your TV using a HDMI cable
if your amplier has HDMI output jack.
BD551-N.BUSALLP_0487.indd 18 7/19/11 11:41 AM