Filter
Top Products
60
59
E
N
G
L
I
S
H
CQ-D1703N
Tr oubleshooting (continued)
■ DVD/VCD
The disc is still unfinalized.
aFinalize the disc.
Refer to “Discs that can be Played Back” (
a
Page 8) or “Notes on
Discs” (
a
Page 47) for other cases.
A DVD-R or DVD-RW is
not playable.
If audio or subtitles in that language are not recorded on the disc, the audio or
subtitles do not switch to that language. (Some discs permit switching
through a menu screen.)
aRefer to the guide provided with your disc.
The audio/subtitle lan-
guage selected in the
user settings is not
used.
It is not possible to switch if the disc does not have multiple audio lan-
guages/subtitle languages/angles recorded on it.
aRefer to the guide provided with your disc.
aSome discs permit switching through a menu screen.
aSometimes, switching angle is possible only with certain scenes.
Cannot switch the
audio language/subti-
tle language/angle.
aSet “D.Range Compression” to “Minimum”.
It is difficult to hear small
sounds. (Dolby Digital
DVD software only)
Subtitle must be recorded on the disc, or they will not appear.
aRefer to the guide provided with your disc.
No subtitles appear.
aA certain amount of distortion is normal.
The picture becomes
distorted while fast for-
warding or reversing.
aVideo CD menu playback works only when playing a video CD that has
the playback control feature.
Video CD menu play-
back does not work.
The video signal setting of this unit (NTSC/PAL) does not match with the
video signal setting of the connected monitor.
aMake the same setting between this unit and the monitor.
The picture appears
incorrectly.
Cables are not correctly connected.
aConnect cables correctly.
aStop the car and apply the parking brake.
The picture does not
appear on the monitor.
The microcontroller in the unit operates abnormally due to noise or other fac-
tors.
aUnplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
Disc unejectable
The unit is not sufficiently secured.
aSecure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
aMake the angle 30˚ or less.
Sound skipping due to
vibration
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
Sound skipping or
noise
There is a flaw or foreign objects on the disc.
aRemove the foreign objects, or use a flawless disc.
The disc has unplayable formatted data.
aRefer to the description about available disc types.
No playback or disc
ejected
Problem
Possible cause
a
Possible solution
Note:
¡Refer to “Discs that can be Played Back”. (a Page 8)