Filter
Top Products
Settings
VQT3C15
27
Still Mode ( paused video )
[BD-V] [AVCHD] [DVD-V ]
Select the type of picture shown when you pause playback
(> 40, “Frames and fields”).
Seamless Play
[DVD-VR]
Select the play mode between playlist chapter segments and
partially deleted titles.
Dynamic Range Compression
[BD-V] [AVCHD] [DVD-V] [MKV]
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥ “Auto” is effective only when playing Dolby TrueHD.
Digital Audio Output
Press [OK] to show the following settings.
≥ For details on digital output (> 30)
Video
! Auto:
Automatically selects the type of picture shown.
! Field:
Select if jittering occurs when “Auto” is selected. (The
picture is coarser.)
! Frame:
Select if small text or fine patterns cannot be seen clearly
when “Auto” is selected.
(The picture is clearer and finer.)
! On
:
The chapters in playlists are played seamlessly. This does
not work while searching or when there are several audio
types included on the playlist. Additionally, the positioning
of chapter segments may change slightly.
! Off:
The points where chapters in playlists change are played
accurately, but the picture may freeze for a moment.
Audio
! On ! Off ! Auto
Dolby D/Dolby D +/Dolby TrueHD
DTS
Select whether Dolby Digital, Dolby Digital Plus, Dolby
TrueHD or DTS Digital Surround is output in “Bitstream” or
“PCM” format.
≥ Not making the proper settings may result in noise.
≥ If the unit is connected with the HDMI AV OUT terminal,
the specifications of the connected equipment take
precedence over this unit and audio selected in these
items may not be output (e.g., when a television is
connected, the HDMI audio output of this unit is limited to
down-mixed 2ch.)
! Bitstream
:
Select “Bitstream” when the connected equipment can
decode the respective audio format.
jConnect equipment supporting HDMI (High Bit rate
Audio) and use a High Speed HDMI Cable in order to
output high bit rate audio such as Dolby Digital Plus or
Dolby TrueHD.
! PCM:
Select “PCM” when the connected equipment cannot
decode the respective audio format.
Refer to the operating instructions for connected devices to
verify whether or not they can decode each of the audio
formats.
BD-Video Secondary Audio
[BD-V]
Turn on/off the button click sound on the menu and audio
with secondary video in picture-in-picture mode. (> 17)
! On
:
The primary audio and secondary audio are mixed and
output. The sampling frequency is converted to 48 kHz.
! Off:
The button click sound on the menu and secondary
audio are not output.
DMP-B200P&PC-VQT3C15_eng.book 27 ページ ２０１０年１２月２２日 水曜日 午後６時２分