Panasonic DMP-BD45 Blu-ray Player User Manual


 
14
VQT2H86
Occasionally, Panasonic may release updated firmware for
this unit that may add or improve the way a feature operates.
These updates are available free of charge.
[BD65] [BD655]
: This unit is capable of checking the firmware
automatically when a connected to the Internet via a
broadband connection.
When new firmware version is available, the following screen
is displayed.
If you use [BD45]
or you use [BD65] and [BD655] but
downloading on this unit fails or this unit is not connected to
the Internet, then you can download the latest firmware from
the following website and burn it to a CD-R to update the
firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
To show the firmware version on this unit. (>28, “System
Information”)
DO NOT DISCONNECT the unit from the AC power or
perform any operation while the update takes place.
After the firmware is installed, “FINISH” will be displayed on
the unit’s display. Unit will restart and the following screen will
be displayed.
[BD65] [BD655] : You can perform update anytime by selecting
“Firmware Update” in the Setup menu. (
> 28)
Downloading will require several minutes. It may take longer or the
Int
ernet may not be connected depending on the connection environment.
[BD65] [BD655] : If you do not want to check for the latest firmware
version, set “Automatic Update Check” to “Off”. (
> 28)
STEP 6 :
Reprogramming the
remote control
Change “Remote Control Code” (> 28) on the main unit and
the remote control (the two must match) if you place other
Panasonic products close together and it responds to this
remote control.
You can operate the TV or amplifier/receiver using the unit’s
remote control.
1 For televisions
Input the code (> 37) with the numbered
buttons while pressing [Í TV POWER].
For amplifiers/receivers
Input the code (> 37) with the numbered
buttons while pressing
[RECEIVER j VOL].
e.g., 0001: [0] B [0] B [0] B [1]
2 Test by turning on the television or
adjusting the volume of the amplifier/
receiver.
If your television or amplifier/receiver brand has more than one code
listed, select the one that allows correct operation.
Firmware updates
Firmware Update
Latest Online Version: x.xx
Current Installed Version: x.xx
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
RETURN
OK
Yes No
The firmware was updated.
Current Installed Version:
x.xx
RETURN
OK
For other Panasonic products
For TV or amplifier/receiver
VQT2H86~Body_eng.fm 14 ページ 2010年1月18日 月曜日 午前10時23分