Filter
Top Products
7
VQT2H96
English
STEP 3 : Connecting to
a broadband network
[BD65]
The following services can be used when this unit is
connected to broadband.
≥ Firmware can be updated
≥ You can enjoy the BD-Live
≥ You can enjoy the VIERA CAST
For details about connection method, refer to the instructions
supplied with the connected equipment.
≥ The unit is not compatible with public wireless LAN services
(Hotspot etc.) provided in airports, stations, cafes etc.
STEP 4 : Setting
After connecting your new player for the first time and
pressing the [Í], a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1 Press [Í].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then the setting information on the TV is acquired by this
TV.
2 Follow the on-screen instructions and
make the settings with [3, 4] and press
[OK].
“On-Screen Language”, “TV Aspect” and “Quick Start” are
set. ([FUNCTION MENU]B“To Others”B“Setup”B
“Display”, “TV / Device Connection” or “General”)
[BD65]
After completing “Easy Setting”, you can perform
“Network Easy Setting”.
≥ You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. ([FUNCTION MENU]B“To Others”B“Setup”B“General”)
After completing “Easy Setting”, you will be asked to perform
“Network Easy Setting”.
Select “Wired” or “Wireless” and press [OK].
∫ “Wired” connection
Follow the on-screen instructions to make your connection
settings.
∫ “Wireless” connection
If you select “Wireless” and “Wireless LAN Adaptor is not
connected.” is displayed, check that the Wireless LAN
Adaptor is fully inserted. Alternatively, disconnect and
reconnect it. If there is still no change in the display, consult
your dealer for advice.
Select “WPS (PUSH button)” or “Search for
access point” and then follow the on-screen
instructions and make the settings.
∫ Using LAN (ethernet) cable
≥ Use shielded LAN cables when connecting to peripheral
devices.
≥ Inserting any cable other than a LAN cable in the LAN
terminal can damage the unit.
≥ Only the Wireless LAN Adaptor DY-WL10 (optional) can be
used.
≥ When connection conditions are poor, use the USB
extension cable supplied with the Wireless LAN Adaptor
DY-WL10 (optional).
≥ Read the operating instructions for the Wireless LAN
Adaptor DY-WL10 (optional) thoroughly when using it.
≥ For up to date compatibility information on your Wireless
router (Access Point) refer to
http://panasonic.jp/support/global/cs/
Broadband
router, etc.
LAN Cable
(Straight)
Internet
Using Wireless
LAN Adaptor
DY-WL10 (optional)
Wireless LAN Adaptor
(optional)
Wireless router
(Access point), etc.
Internet
Easy Setting
Standby/on switch (Í/I)
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Network Easy Setting [BD65]
(7)
BD65_45_EGsimple(VQT2H96).book 7 ページ ２０１０年１月２０日 水曜日 午後３時４１分