Filter
Top Products
8
VQT4V11
Control reference guide
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using the
unit's remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers
4 Cancel
5 Select audio (> 17)
6 Basic playback control buttons (> 17)
7 Show status messages (> 18)
8 Show Pop-up menu/Top menu (> 18)
9 Show Option menu (> 22)
10 Colored buttons (red, green, blue, yellow)
Used for various purposes depending on the
display.
11 Transmit the remote control signal
12 Open or close the disc tray (> 15)
13 Show Setup menu (> 24)
14 Switch Secondary Video on/off
(Picture-in-picture) (> 23)
15 Show the Home screen of Network Service
(> 19)
16 Exit the menu screen
17 Show Netflix screen (> 19)
18 Show HOME menu (> 15)
19 [3, 4, 2, 1] :
Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 17)
20 Return to previous screen
1 Standby/on switch (Í/I) (> 12)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
2 Start play (> 17)
3Stop (> 17)
4 Open or close the disc tray (> 15)
5 Disc tray (> 15)
6 USB port (> 15)
7 INFO LED (> 28, “LED indicators”)
Displays the various states of this unit.
8POWER LED
Blinks when the power is turned on.
Wait for the LED to turn solid green before
using this unit.
9 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
Rear panel terminals (> 9–11)
1
2
3
6
4
5
7
8
19
10
9
20
18
16
15
17
14
13
12
11
1234
5 6 7 8 9
DMP-BD89_79_VQT4V11_eng.book 8 ページ ２０１２年１２月１７日 月曜日 午前９時１３分