Filter
Top Products
8
SQT0108
Control reference guide
When other Panasonic devices respond to the
remote control of the unit, change the remote
control code. (> 25)
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers
4 Cancel
5 Change audio (> 16)
6 Basic playback control buttons (> 16)
7 Show Closed Caption setup screen
(> 21, 23)
8 Show Pop-up menu/Top menu (> 17)
9 Show Option menu (> 20)
10 Colored buttons (red, green, yellow, blue)
Used for various purposes depending on the
display.
11 Transmit the remote control signal
12 Open or close the disc tray (> 13)
13 Show Setup menu (> 22)
14 Show the status messages (> 17)
15 Show the Home Screen of Network Service
(> 18)
16 Exit the Menu screen
17 Show Netflix screen (> 18)
18 Show HOME menu (> 14)
19 [3, 4, 2, 1] :
Move the highlight for selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 16)
20 Return to previous screen
1 Disc tray (> 13)
2 USB port (> 13)
3 POWER LED
The LED lights up when the unit is turned on,
and flashes when error occurs. (> 29)
4 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
5 Open or close the disc tray (> 13)
6 Basic playback control switches (> 16)
7 Standby/on switch (Í/I) (> 11)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
Rear panel terminals (> 9, 10)
1
2
3
6
4
5
7
8
19
10
9
20
18
16
15
17
14
13
12
11
75 6
1 2 3 4
DMP-BD91_81_SQT0108_eng.book 8 ページ ２０１３年１２月３日 火曜日 午前１０時５０分