Filter
Top Products
26
VQT4V26
“HDMI CEC”
This unit supports “HDMI CEC” (Consumer
Electronics Control) function.
You can use this function by connecting the
equipment with an HDMI cable*. See the
operating instructions for connected
equipment for operational details.
* [BDT330] : Only when connecting via an HDMI AV OUT
MAIN terminal on this unit.
Preparation
1 Set “HDMI CEC” to “On” (> 34). (The default
setting is “On”.)
2 Set the “HDMI CEC” operations on the
connected equipment (e.g., TV).
3 Turn on all “HDMI CEC” compatible
equipment and select this unit’s input channel
on the connected TV so that the “HDMI CEC”
function works properly.
Repeat this procedure when the
connections or settings are changed.
When play starts on the unit, the TV will
automatically switch the input channel and the
screen of this unit will be displayed.
Additionally when the TV is off, the TV will
automatically turn on.
≥ [BDT330] : When “HDMI(SUB) Output Mode”
(> 30) is set to “Normal” and the power of the
device connected to the HDMI AV OUT SUB is
turned on, the Power on link to the device
connected to the HDMI AV OUT MAIN will not
work.
All connected equipment compatible with “HDMI
CEC”, including this unit, automatically turns off
when you switch the TV off.
≥ Operation cannot be guaranteed on all HDMI CEC
devices.
Automatic input switching
Power on link
Power off link
DMP-BDT330_230_VQT4V26_eng.book 26 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分