Filter
Top Products
Reference
39
VQT4W95
Cannot hear the desired audio type.
¾ Check the connections and the “Digital Audio
Output” settings. (> 12, 31)
Disc cannot be played.
¾ The disc is dirty. (> 5)
¾ The disc is not finalized. (> 7)
Still pictures (JPEG) do not play back
normally.
¾ The images that were edited on the PC, such
as Progressive JPEG, etc., may not be played
back.
I can’t play back BD-Live.
¾ Confirm that this unit is connected to the
broadband Internet. (> 14)
¾ Confirm the “BD-Live Internet Access”
settings. (> 34)
¾ Confirm a USB device is connected to the
USB port. (> 17)
Audio
Cannot switch audio.
¾ The audio cannot switch, if “Digital Audio
Output” is set to “Bitstream”. Set “Digital
Audio Output” to “PCM”. (> 31)
¾ [BDT330] When connecting this unit to a TV
via an HDMI AV OUT MAIN and to an
amplifier/receiver via an HDMI AV OUT SUB,
set “HDMI(SUB) Output Mode” to
“V.OFF(Video Off)”. (> 12)
¾ To output audio from a device connected with
an HDMI cable, set “HDMI Audio Output” to
“On” in the Setup menu. (> 31)
There is no sound coming out from the TV.
[BDT330]
¾ Audio may not output from the TV when the
amplifier/receiver is connected to the HDMI
AV OUT SUB, and “HDMI(SUB) Output
Mode” (> 31) is set to “V.OFF(Video Off)”. In
such a case, output audio from the amplifier/
receiver. To output audio from the TV, set the
“HDMI(SUB) Output Mode” to “Normal”.
Playback
DMP-BDT330&230_GNGAGCGW-VQT4W95_mst.book 39 ページ ２０１３年２月２７日 水曜日 午前１１時２分