Filter
Top Products
23
RQT8859
Watching analogue and digital broadcasts
1 Turn on the television and select the
appropriate AV input to suit the
connections to this unit.
2 Press [Í DVD] to turn the unit on.
3 Press [WXCH] to select the channel.
Everytime you change the station, a digital channel information
appear automatically (terrestrial digital channels only).
Channels are displayed in the order of digital channels first,
and then followed by analogue channels.
≥Digital channel
You can also select the channel with the numbered buttons.
≥Analogue channel
You can also select the channel with the following steps.
1 Press [ANALOGUE CH].
2 Press the numbered buttons to select the channel.
∫If New service message appears
When a new DVB channel is added this unit will be informed
automatically. Then the confirmation message appears. If you
select “Yes” on the display, Auto-Setup starts (all channel
settings and all created favourite groups are deleted. The
timer recording programmes are also cancelled.).
The display/hide setting can be changed (➡ 67, New Service
Message).
[Note] (Digital broadcast only)
≥This unit can receive Standard Definition (SD) broadcasts, but is
unable to receive High Definition (HD) broadcasts.
When High Definition (HD) programmes are broadcast, “Unable to
decode HD” is displayed in the digital channel information
(➡ below).
≥This unit can receive free cable television but it cannot receive paid
services.
While stopped
Press [STATUS ] to show the information
screen.
To switch information of the current programme and the next
programme
Press [2, 1].
To select the information for other stations
Press [3, 4].
≥Press [OK] to watch the selected station.
To show detailed information about the programme
Press [STATUS ]
again (only when “info ” is displayed).
≥Signal Quality
No Signal: The digital broadcast signal is not being received.
Bad Signal: Due to poor signal conditions, etc., the digital broadcast
signal has been interrupted.
No Service:No broadcasts are currently available.
∫ To change the group to easily select one of your
favourite channels (➡ 69)
You can press the “Blue” button to change the group (e.g., TV, Radio,
Edit Favourites screen) and then press [3, 4] to select the channel.
∫ To change the length of time digital channel
information is displayed
You can change the length of time digital channel information
(➡ 67, On-Screen Messages).
[Note]
≥By following the information sent from the station, you can check
the programme information.
≥If you record a digital radio broadcast or a digital broadcast that is
not being received correctly, digital channel information is also
recorded and will remain visible during playback.
∫ If a software update is available, a notification is
displayed on the digital channel information
Press the “Red” button to launch software update screen.
This unit is a DVD recorder with an integrated DVB tuner. This
means that you can receive and record both analogue and
terrestrial digital channels without having to connect an additional
DVB receiving unit.
Select the channel
e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
115: [1] ➡ [1] ➡ [5]
e.g., 5: [0] ➡ [5]
15: [1] ➡ [5]
STAT US
REC MODE
REC
MANUAL SKIP
CREATE
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
G
U
I
D
E
RETURN
PLAY/x1.3
PAUSE
STOP
SLOW/SEARCH
SKIP
CH
PAG E
SELECT
INPUT
0
9
8
7
6
54
3
2
1
CH
AV
Í
TV
DRIVE
SELECT
Í
DVD
VOL
DELETE
EXIT
OK
OPTION
ANALOGUE
CH
G-Code
AUDIO
DISPLAY
TIME SLIP
PROG/CHECK
3,4,2,1
OK
STATUS
2
3
ANALOGUE
CH
“Blue”
“Red”
Numbered
buttons
REC
OPEN
/
CLOSE
2
3
RECREC
RECREC
A New DVB Service has been found.
Start the DVB Auto-Setup?
Selecting the DVB Auto-Setup will delete
the current Favourite settings and all Timer Programmes.
New Service
NoYes
OK
RETURN
Digital channel information
If “No Signal” or “Bad Signal” is displayed, check the
following:
≥Adjust the position and direction of the aerial.
≥Check that the current digital broadcast channel is correctly
broadcasting.
352 ABC2
No Signal
All Services
18:53
Change Favourite
info
ABC News
19:00 - 19:30
NOW
Multi Audio
Encrypted
PG
Current time
During scrambled broadcasting
(Cannot be viewed with this unit.)
Broadcast time
Programme is broadcast in multi-channel
sound (➡ 43, DVB Multi Audio)
Group
Channel
Programme name
Change the
group
(➡ below).
Signal Quality (➡ below)
Station Name
Progress of the current programme
The parental ratings level is displayed.
352 ABC2
No Signal
All Services
18:53
Change Favourite
Software update
ABC News
19:00 - 19:30
NOW
Multi Audio
Encrypted
PG
Software update
STEP 3 Set up to match your television and remote control/Watching analogue and digital broadcasts
EX77_87GN.book Page 23 Wednesday, May 30, 2007 1:10 PM