Filter
Top Products
En
12
<J2M10501B> 12
Playing files stored on USB
devices
The player may not recognize the USB device, may
not play files or may not supply power to the USB
device. For details, see When a USB device is con-
nected on page 19.
Pioneer does not support that all files recorded on
all USB devices will play or that power will be sup-
plied to the USB device. Also note that Pioneer will
accept no responsibility whatsoever for loss of files
on USB devices caused by connection to this player.
1 Turn the power on.
Press STANDBY/ON.
2 Switching the input to the USB mode.
Press DVD/USB.
USb is displayed on the front panel display.
3 Connecting USB devices.
The Disc Navigator appears automatically.
Player’s front panel (DV-220KV-K)
USB device
To USB port
4 Starts playback.
Use /
/
/
to select the file, then press ENTER.
Turn the power off before removing the USB device.
The input will remain in the USB mode the next time
the power is turned on. To return to the DVD mode,
press DVD/USB (or press OPEN/CLOSE to open
the disc tray).
Recording audio CD tracks
on USB devices
The tracks of audio CDs loaded in the player can be
recorded on a USB device connected to the USB
port.
It may not be possible to record tracks of audio CDs
on a USB device. For details, see When a USB device
is connected on page 19.
Selecting the track(s) to be
recorded
1 Load the audio CD.
If playback starts automatically, press STOP
to stop playback.
2 Display the Home Menu.
Press HOME MENU.
3 Select CD -> USB Rec.
Use /
/
/
to select, then press ENTER.
Start
Selected Track
Total Time
00
000:00
Select Track
Bitrate
Individual
Select All
All Clear
01:43
03:17
04:18
04:59
04:20
04:38
04:40
04:11
Track 1–13
Track01
Track02
Track03
Track04
Track05
Track06
Track07
Track08
CD –> USB Rec
4 Select Select Track Individual the
track(s) you want to record.
Use /
/
/
to select.
Individual: Select 1 track at a time.
Select All: Select all the tracks.
All Clear: Deselect all the tracks.
5 Select Bitrate (transfer rate).
Use /
/
/
to select, then press ENTER.
Select 128kbps, 192kbps or 320kbps.
6 Start recording.
Use /
/
/
to select Start, then press ENTER.
Notes
The audio signals are converted into MP3 format for
output.
CD -> USB Rec can only be selected when the audio
CD is stopped.
When recording is completed, a folder named
“PIONEER” is automatically created on the USB
device. The recorded tracks are stored in this folder.