Panasonic DVD-S53 DVD Player User Manual


 
RQTC0128
Using On-Screen Menus
1 2 3 4
Select the item.
Press to exit.
Select
Select
Items shown differ depending on the type of software.
Each time you press the button:
On-Screen Menu 1
On-Screen Menu 2
On-Screen Menu 3
On-Screen Menu 4
Exit
On-Screen Menu 1 (Disc/Play)
e.g.
T9 C99
PG SEARCH, PL SEARCH,
TITLE SEARCH, CHAPTER
SEARCH, TRACK SEARCH,
CONTENT SEARCH
To start from a specific item
Press [e r] to select and press [ENTER], or, press the numbered buttons.
This does not work when using playback control (
page 25, Glossary).
AUDIO
( page 15, Changing soundtracks)
PLAY SPEED
( page 14, Changing play speed)
REPEAT MODE
( page 14, Repeat play)
A-B Repeat (To repeat a specified section)
Except still picture on
Press [ENTER] at the starting and ending points.
Select “OFF” to cancel.
SUBTITLE ( page 14, Changing subtitles)
ANGLE ( page 15, Angle select)
DATE DISPLAY Displays the photograph date
OFF ON
ROTATION
( page 15, Still picture rotation)
JPEG
Using On-Screen Menus
16
JPEG DivX
(Disc/Play)
(Video)
(Audio)
(HDMI)
Register
Register
DIALOG ENHANCER ( page 15, Dialogue enhancer)
REMASTER Discs recorded with multi channels LPCM at 44.1 kHz or 48 kHz
This feature gives you a more natural sound by adding the higher frequency signals not recorded on the disc.
Discs recorded at 44.1 kHz or 48 kHz
This feature reproduces the frequencies lost during recording to give you a sound closer to the original.
Press [e r] to select “OFF”, “1”, “2” or “3”.
Setting Type of music Effect level
1 High tempo (e.g., pop and rock) Light
2 Various tempos (e.g., jazz) Medium
3 Low tempo (e.g., classical) Strong
OFF Off Off
When connecting with DIGITAL AUDIO OUT terminal, the actual output sampling frequency depends on “PCM OUTPUT” setting in
“AUDIO” menu (
page 20).
This feature may not work when connected with HDMI AV OUT terminals.
This may not work depending on the disc’s recording.
This does not work with on DVD-RAM or DVD-R/RW.
ADVANCED SURROUND
( page 14, Enjoying advanced surround)
PICTURE MODE ( page 14, Changing picture mode)
ZOOM ( page 15, Zoom)
DNR ( page 15, Reducing noise in pictures)
TRANSFER MODE ( page 15, Transfer mode)
SOURCE SELECT
(depends on disc)
When you select “AUTO” the constructing method of the DivX contents is automatically distinguished and output. If the picture is distorted,
select “INTERLACE” or “PROGRESSIVE” depending on which constructing method was used when the contents were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
1
2
3
5 6
7
8 9
0
4
DVD-V
Press [FUNCTIONS] will display only “On-Screen Menu 4” during “nodISC” or when the disc tray is opened.
Note
Press.
Make the settings.
VCD
MPEG4
DVD-S53 (RQTC0128-2P)_P_PC_PX.indd 16 3/21/2007 11:29:37 AM