Filter
Top Products
RQTC0128
Picture distorted. Ensure that the unit is not connected through a video
cassette recorder.
(7)
Make sure that progressive output has not been selected
when the connected television is not progressive compatible.
Press and hold [RETURN] until the picture displays correctly.
The settings will return to “INTERLACE”.
Change “SOURCE SELECT” in On-Screen Menu 2.
(17)
•
•
•
Picture size doesn’t
fit the screen.
Change “TV ASPECT” in “VIDEO” menu.
(19)
Use the television to change the aspect. If your television
does not have that function, change “TV ASPECT”.
(19)
Change the zoom setting.
(15)
•
•
•
Picture stops. Picture may stop if the DivX files are greater than 2GB.•
The television may
display incorrectly or
colors appear faded.
PAL discs cannot be played.
Connect to a progressive output compatible television to
enjoy progressive video.
Picture may not be seen when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
•
•
•
Menu not displayed
correctly.
Restore the zoom ratio to “NORMAL”.
(15)
Change “TV ASPECT” in “VIDEO” menu.
(19)
•
•
Troubleshooting guide
22
Troubleshooting guide
DivX
Sound distorted. Set Advanced surround to “OFF”. (14)
Noise may occur when playing WMA files.
With HDMI AV OUT connections, audio may not be output
from other terminals in the way that was set.
•
•
•
No sound. Turn the volume up.
Audio may not be output due to how files were
created.
Audio may not be heard when more than 4 devices are
connected with HDMI cables. Reduce the number of
connected devices.
When using the HDMI connection, ensure that “AUDIO OUT”
in the “HDMI” menu is set to “ON”.
•
•
•
•
Piercing noise
comes from the
speakers.
If you have connected a digital amplifier which does not
include decoder, be sure to select “PCM” in “DOLBY
DIGITAL” or “DTS” in “AUDIO” menu.
(20)
•
Effects do not work. None of the audio effects work when the unit is outputting
bitstream signals from the COAXIAL or HDMI AV OUT
terminal. (8, 9)
Some audio effects do not work or have less effect with some discs.
Advanced surround and Remaster do not work if you have
changed the play speed.
•
•
•
There is ghosting
when progressive or
HDMI output is on.
This problem is caused by the editing method or material
used on DVD-Video, but should be corrected if you use
interlace output. Change “VIDEO OUT (I/P)” in “VIDEO”
menu to “INTERLACE”.
(19)
•
Pictures not in
progressive output.
If the unit is connected to the television through VIDEO OUT
or S VIDEO OUT, output will be interlace.
•
Closed captions not
displayed.
When progressive output or HDMI output is on, closed
captions will not be displayed.
•
Picture incorrect
Progressive video
DivX
It takes time before
play starts.
Play may take time to begin when an MP3 track has still
picture data. Even after the track starts, the correct play time
will not be displayed, however this is normal.
This is normal on DivX video.
•
•
The program
functions do not
work.
These functions do not work with some DVD-Videos.
•
Menu doesn’t
appear.
with
playback control
Press [g] twice and then press [q] (PLAY).•
Play doesn’t start.
If a disc contains CD-DA and other formats, proper playback
may not be possible.
This unit may not play WMA and MPEG4 that contains still
picture data.
If playing DivX VOD content, refer to the homepage where
you purchased it. (Example: www.divx.com/vod)
•
•
•
No subtitles. Display the subtitles. (14)•
The subtitles
overlap closed
captions recorded
on discs.
Clear the subtitles.
(14)•
In A-B Repeat, point
B is automatically set.
The end of an item becomes point B when it is reached.•
Repeat play is
automatically
canceled.
A-B Repeat is canceled when you press [QUICK REPLAY].
Repeat play may be canceled when you press [CM SKIP].
•
•
MP3 DivX
Specific operation impossible or incorrect
VCD
Cannot record to
digital recording
equipment.
(Incorrect sound
recorded.)
You cannot record WMA/MP3.
You cannot record DVDs that have protection preventing
digital recording.
You cannot record DVDs if the recording equipment cannot
handle signals with a sampling frequency of 48 kHz.
Make the following settings:
– ADVANCED SURROUND: OFF
(14)
– PCM OUTPUT: UP TO 48kHz
(20)
– DOLBY DIGITAL: PCM
(20)
– DTS: PCM
(20)
•
•
•
•
Recording
The number following
“H” depends on the
status of the unit.
Trouble may have occurred. Turn the unit off and then back
to ON. Alternatively, turn the unit off, disconnect the AC
power supply cord, and then reconnect it.
If the service numbers fail to clear, note the service number
and contact a qualified service person.
•
•
You inserted a disc the unit cannot play; insert one it can.
(5)
You inserted a blank disc.
You inserted a disc that has not been finalized.
(5)
•
•
•
You haven’t inserted a disc: Insert one.
You haven’t inserted the disc correctly: Insert it correctly. (10)
•
•
The disc may be dirty.
(6)
You haven’t inserted the disc correctly: Insert it correctly. (10)
•
•
The connected equipment is not HDMI-compatible.
•
The HDMI connection acts unusually.
– The connected equipment is not HDMI-compatible.
– The HDMI cable is too long.
– The HDMI cable is damaged.
•
DVD-S53 (RQTC0128-2P)_P_PC_PX.indd 22 3/21/2007 11:29:42 AM