Panasonic DVD-S48 DVD Player User Manual


 
13
VQT3L77
OperationsReference
Troubleshooting
Before requesting service, make the following
checks. If you still need assistance, please contact
us.
U.S.A. and Puerto Rico: See page 14.
Canada: See page 15.
To reset
Images from this DVD player do not appear
on the television.
You forget your password.
Reset the DVD player to the factory defaults.
Press POWER 8 on the DVD player to
turn it on.
Press OPEN/CLOSE ; to open the disc
tray.
Press and hold g and q on the DVD player
at the same time for more than 5 seconds
with the tray open.
All the settings return to the factory preset.
1)
2)
3)
No picture./No sound.
Check the video connection between the DVD
player and the TV.
Turn on your TV and set to the correct in
channel for the DVD player.
Remote control does not work.
Aim the remote control directly at the sensor
on the front of the DVD player.
The screen is distorted. Noise occurs.
Check if the TV System setting is correct.
Discs cannot be played back.
Check for any scratches or smudges on the
disc. If the disc is dirty, clean the disc.
Not able to select some items in the setup/
system menu.
Press STOP g twice before selecting the
setup/system menu.
Depending on the disc availability, some menu
items cannot be selected.
Speci cations / Troubleshooting Changing the player settings
When the following messages on the unit’s
display.
(LOAD)
Loading the media. Wait a moment.
(STOP)
Stopping the playback.
There is no disc, or a disc that cannot be
played has been inserted.
(OPEN)
The tray is open.
(TITLE)
The disc title is displayed.
Press e r w q to select the title, then
press OK.
(NOUSB)
There is no USB device in USB mode.