Panasonic PV-D4753S DVD VCR Combo User Manual


 
20
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Playback/ Record on a Tape
Ready Checklist
All connections are made. (pp. 12 ~ 15)
TV and DECK are plugged in.
TV is on and tuned to CH 3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR.)
Insert a tape.
DECK power comes on. If Auto VCR/TV (see
p. 32) is set to OFF, press VCR/TV on the
remote to be VCR mode.
If tape has no rec. tab (p. 6), auto play begins.
Special Features During Play
1
2
3
Press REW/SLOW- or FF/SLOW+ in Stop
mode to rewind or fast forward a tape.
Press EJECT on remote, or STOP/EJECT
on DECK to eject a tape.
Press STOP to stop a tape.
Press PLAY* to play a tape.
Forward/Reverse Scene Search
Press FF/SLOW+ or REW/SLOW-.
Press PLAY to release.
After search has begun, each additional press of
FF or REW changes speed as shown below.
[SLP] : Approx. 21X
Approx. 9X
[LP] : Approx. 9X
Approx. 7X
[SP] : Approx. 7X
Approx. 3X
If at 21X, 9X, or 7X speed the picture is
interrupted, change speed to 9X, 7X, or 3X.
Still (Freeze) Picture
Press PAUSE/STILL.
Press PLAY to release.
Frame by Frame Picture
Press PAUSE/STILL in Still mode.
Press PLAY to release.
Slow Motion Picture
Press FF/SLOW+ (increase speed) or
REW/SLOW- (decrease speed) in Still
mode.
Press PLAY to release.
Playback a Tape
Picture interruption may occur with some TVs.
FF and REW search speed may vary
depending on current tape position.
Notes
These features work best in SP or SLP mode.
The sound will be muted.
To reduce picture noise, see Manual Tracking
Control on page 6.
After DECK is in Still or Slow mode for 3 minutes,
it will switch to Stop mode automatically to
protect the tape and the video head.
Notes
PAUSE/
STILL
REW/SLOW-
STOP
FF/SLOW+
EJECT
CH /
SPEED
REC
VCR/TV
PLAY
DVD
VCR
Insert a tape.
21
Playback using DECK buttons
Press PLAY.
Multi Function Display
Press STOP/EJECT to stop
and/ or eject a tape.
D4753S P1-25.p65 2003/03/13, 11:3220