Filter
Top Products
14
Basic Controls
R - STANDBY
G POWER ON
INPUT MENU ENTER
+
-
VOL
TH-42PWD7
Enter / Aspect button
(see page 16, 19)
INPUT button
(INPUT1, INPUT2, INPUT3 and PC IN selection)
(see page 18)
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF ...Indicator not illuminated (The unit will still
consume some power as long as the power
cord is still inserted into the wall outlet.)
• Standby .....Red
• Power-ON .....Green
• DPMS ........... Orange (With PC input signal and during
operation of PC’s screensaver.)
Remote control sensor
C.A.T.S. sensor
Plasma C.A.T.S. (Contrast Automatic Tracking System)
Plasma C.A.T.S. automatically senses the ambient light
conditions and adjusts the brightness and gradation
accordingly, to optimise contrast.
(Effective when PICTURE MENU is set to AUTO.)
Volume Adjustment
Volume Up “+” Down “–”
When the menu screen is displayed:
“+”: press to move the cursor up
“–”: press to move the cursor down
(see page 16)
MENU Screen ON / OFF
Each time the MENU button is pressed, the
menu screen will switch. (see page 16)
Normal Viewing PICTURE SET UP
SOUND PICTURE POS./SIZE
Status button
1
Input label
2
Aspect mode (see page 19)
3
Off timer
The off timer indicator is displayed only when the
off timer has been set.
Press the “Status” button to display the current system
status.
OFF TIMER 90
1
2
3
PC
NORMAL
PC button
Press the “PC” input mode selection button to select
the PC input mode.
This button is used to switch directly to PC input mode.
Note:
After-image (image lag) may occur on the plasma
display panel when a still picture is kept on the panel
for an extended period. The function that darkens the
screen slightly is activated to prevent after-image (see
page 38), this function is not the perfect solution to after-
image.
N button (see page 20, 22, 23, 24)
PICTURE button (see page 22)
MULTI Window buttons (see page 21)