Panasonic C-20LA5 Flat Panel Television User Manual


 
13
Tuning Channels
Automatically scans and stores all the TV channels.
Notes:
• When any button is pressed during AUTO PROGRAM,
the TV will return to the normal viewing. (Channels
searched up to that point are added.)
• After AUTO PROGRAM finishes, the lowest channel
number added will be displayed.
• When there is no receivable channel, channel 69 (for
TV) or channel 125 (for cable TV) is displayed.
Press to select PROGRAM CH.
Press to display the PROGRAM
CHANNELS screen.
2
3
Press to select MODE.
Press to select TV or CABLE.
4
Press to select AUTO
PROGRAM.
Press to display the AUTO
PROGRAM screen.
5
Press to select YES.
Press to start AUTO
PROGRAM.
Automatic channel programming
Press the TV/VIDEO button to display the TV channel.
1
MENU
ADJUST SET UP
LANGUAGE
PROGRAM CH
LOCK
CLOSED CAPTION
INPUT LABEL
OTHER ADJUST
AUTO PROGRAM
Activate
“AUTO PROGRAM?”
YES NO
AUTO PROGRAM
In “AUTO PROGRAM”
CHANNEL
59
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
[MODE selection]
Press the MENU button to display the MENU screen and select SET UP.
Manual channel programming
Channels will automatically advance until all channels have
been scanned. Channel numbers with video signal
received will be stored in the Channel Memory.
Press to select MANUAL
PROGRAM.
Press to display the
MANUAL PROGRAM
screen.
4
Press to select the channel.
•You can also use the
numbered buttons.
5
6
Press to add the channel to
the Channel Memory (the
channel number turns blue).
Press to delete the channel
from the Channel Memory
(the channel number turns
yellow).
Add or delete a channel manually.
PROGRAM CHANNELS
MODE
AUTO PROGRAM
MANUAL PROGRAM
TV
CABLE
MANUAL PROGRAM
ENTER CHANNEL
121
Repeat steps 5 and 6 for other channels.