Filter
Top Products
21
AUDIO ADJUST
1
2
Press to select AUDIO ADJUST.
Press to display the AUDIO ADJUST screen.
Press to select the sub-menu.
Select the setting listening to the sound.
Press to activate the setting if necessary.
MODE
Notes:
• Red display : With signal
White display : No signal
White display (All modes) : MONO
• To change the mode using SAP button
(see page 12).
STEREO/SAP/MONO
BASS, TREBLE
You can change the level of each sub-menu
(BASS and TREBLE) for each MODE (AUTO,
STANDARD, DYNAMIC and MUSIC)
according to your personal preference.
NORMAL/NORMALIZE
Select “NORMALIZE” and press “OK” button to return each MODE to the factory default setting.
Notes:
• “NORMAL” means the MODE is at the factory default setting. “NORMAL” changes to “NORMALIZE” when you change
the setting of BASS or TREBLE.
• You can normalize each MODE separately.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
AUDIO ADJUST
NORMAL
MODE
BASS
TREBLE
STEREO SAP MONO
+ 5
+ 3
AUTO
Press the MENU button to display the MENU screen and select ADJUST.
MODE
AUTO
STANDARD
DYNAMIC
MUSIC
Function
Automatically adjusts for a wide Dynamic Range.
Emits the original sound.
Gives contrast to sound.
For programs consisting mainly of music. Enhances high sounds (around 4 kHz).
Sub-menu
BASS
TREBLE
Function
Adjusts low frequencies.
Adjusts high frequencies.
MODE
STEREO
SAP
MONO
Function
Two channel audio reception.
Second Audio Programming
(typically used for bilingual audio).
Select when stereo signal is weak.