Panasonic WJ-RT416 DVR User Manual


 
50
Screenshot 1
Select "Advanced Setup" under "Monitor System
Config" from the pop-up menu ( page 44).
The "Advanced Setup" window will be displayed.
Step 1
Configure the following setup items.
Disconnect Time
The live image will be disconnected when no operation
of the PC has been made for the selected duration.
The following are available for "Wait Time".
30Min, 1Hour, 2Hours, Never
When the "Auto Reconnect" checkbox is checked, the
disconnected live image will be automatically connected
again within 5 minutes even when the recorder is dis-
connected due to a connection error, etc.
Default: Never (Auto Reconnect ON)
Subtitle Setup
Information to be displayed on the monitor can be
selected.
Check the desired checkbox to display the respective
information.
Time & Date: When displaying live images, the current
time and date will be displayed. When displaying
recorded images, the recording time and date will be
displayed.
Stream: The speed of image transmission will be dis-
played.
Recorder Name: The recorder name will be displayed.
Camera Info.: The camera name and the set image
quality will be displayed.
Default: All checkboxes are checked
Alarm Sound Setup
Select "On" or "Off" to determine whether or not to
sound the alarm buzzer (will be heard from the PC
speaker) when the software receives an alarm notifica-
tion.
Default: On
Advanced Setup (Monitoring System Config – Advanced Setup)
Configure the advanced setup on the "Advanced Setup" window.