Panasonic NV-MV20 Series VCR User Manual


 
Stand-by/on switch /I
Press to switch the unit from on to stand-by mode or vice
versa. In stand-by mode, the unit is still consuming a small
amount of power.
5
EXT LINK
Volume control.
RESET/CANCEL
OSD/DISPLAY
OFF TIMER
VPS/PDC
SP/LP/EP
Channel selector
Displays the Timer menu.
Sets the tape speed.
Activates the recording timer.
Press the button repeatedly to display the time,
tape counter or remaining tape.
AV LINK
TV/TEXT
AUDIO
PROG PLAY
VCR / TV switch
Selects the TV set's AV port.
Changes the screen format.
Selects a programme memory location and inputs
the ShowView number. Example: 18=
RESET : Resets the counter to 0:00.00.
CANCEL: Clears an entry you made.
Finds the start of a programme.
Displays the ShowView menu.
Controls the beginning and end of a recording
session by a special signal.
Record
Activates the recording timer for externally
controlled recording.
Toggles between TV reception and video playback
channel.
INPUT SELECT
I-TIMER
REC
PROG/CHECK
Audio mode
Toggles between AV inputs A1, A2 and A3.
ShowView
Plays back programmed recordings.
TV :
VCR:
Selects the AV input and navigates in
the teletext menu.
Menu entries.
TRACKING/V-LOCK
TV ASPECT
CH
CH
TIMER
CH
TV
TV
TV
TV
Toggles between TV reception and video text
reception.
TV
VCR
TV
TV
VCR
P. 25
VCR
TV
P. 14
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
VCR
P. 13
P. 10
P. 17
P. 15
P. 12
P. 10
P. 11
P. 12
P. 10
P. 16
VCR
VCR
P. 16
VCR
TV
VCR
Tracking control of disturbed VCR image.
Switches the unit into stand-by mode after the set
time of recording, playback or in Stop mode.
Defines programmes transmitted to the same
program memory location at the same time.