Filter
Top Products
13
Option Setting
1 Press the MENU button U to display
the Main menu on the TV screen.
2 Press the Cursor buttons (34) S
to select [OPTION] then press the
OK button T.
3 Press the Cursor buttons (34) S to select the desired
field.
For NV-FJ735AM only
TAPE SELECT: To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
– Press the Cursor buttons (21) S to select the
corresponding video cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
– The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
used to record NTSC signals.
– Press the Cursor buttons (21) S to select [AUTO].
Allows NTSC [4.43] or [3.58] signals to be distinguished
automatically.
– If the tape has not recorded correctly,
select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
NTSC PB SELECT: To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
– Press the Cursor buttons (21) S to select the desired
position according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43
signals.
3.58: For TVs that can receive NTSC 3.58
signals.
MENU
SELECT
END
: , OK
:MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
JET NAVIGATOR: To set to the conditions for the Jet
Navigator Function.
– Press the Cursor buttons (21) S to select [ON] or
[OFF].
OFF: Initially set at this position.
ON:
appears on the VCR display and Jet
Navigator function works.
If you select [ON], [OSD REC] is set to [OFF]
automatically.
DELETE NAVIDATA: To delete all the Jet Navigator
data stored in the VCR’s memory.
– Press the Cursor buttons (21) S to select [OK] then
press the OK button T to do the deletion.
NO: Initially set at this position.
END: It is done to delete all the Jet Navigator data.
OSD REC: To set to the conditions for the
OSD Recording function.
– Press the Cursor buttons (21) S to select [ON] or
[OFF].
OFF: Initially set at this position.
ON: This setting enables OSD Recording.
(See page 17.)
If you select [ON], [JET NAVIGATOR] is set to
[OFF] automatically.
DIRECT REC: To set to the conditions for Direct
TV Recording Function.
– Press the Cursor buttons (21) S to select [ON] or
[OFF].
OFF: Initially set at this position.
ON: This setting enables Direct TV Recording.
AV Input becomes exclusive channel for Direct
TV Recording.
(See page 17.)
AUDIO MIX: To set the Audio mode to be used
during playback.
– Press the Cursor buttons (21) S to select [ON] or
[OFF].
ON: Both sound tracks (the Hi-Fi sound track and
the normal sound track) are played back mixed
together.
OFF: Normally set at this position to reproduce the
better sound available from the Hi-Fi track.
MONAURAL: To select the sound mode.
(For NV-FJ735AM only)
– Press the Cursor buttons (21) S to select [ON] or
[OFF].
ON: To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted
due to inferior reception conditions.
OFF: Normally set at this position.
4 Press the MENU button U twice to exit the On Screen
Display.
END :MENU
TAPE SELECT
[
AUTO
]
NTSC INPUT SELECT
[
AUTO
]
NTSC PB SELECT
[
onPALTV
]
JET NAVIGATOR
[
OFF
]
DELETE NAVIDATA
[
NO
]
OSD REC
[
OFF
]
DIRECT REC
[
OFF
]
AUDIO MIX
[
OFF
]
SELECT:
OPTION 1/2
END :MENU
MONAURAL
[
OFF
]
SELECT:
OPTION 2/2