Filter
Top Products
17
To Immediately Record the Same Scenes
of Programme That You Are Viewing on the
TV (Direct TV Recording)
This function allows you to immediately start recording the
same scenes of programme that you are viewing on the TV.
Conditions for correct operation of the Direct TV Recording
function:
– Set [DIRECT REC] to [ON] (see page 13).
– The VCR must be connected to the TV’s Audio/Video
output socket via Audio/Video cable as shown.
To Perform Direct TV Recording:
1 Insert a video cassette with an intact erasure prevention
tab.
2 Press the DIRECT REC button Q.
– Recording of the TV programme that you are viewing on
the TV starts.
– In some cases, it may not be possible to change the
programme position on the TV during Direct TV
Recording.
When viewing or displaying the programme from your TV:
– Do not press the AV button 3, Numeric buttons 2 or
Channel button N during Direct TV Recording,
otherwise the recording may not be performed correctly.
When viewing or displaying the programme from your
VCR:
– It is possible to select and view any other TV
programme from your TV while the Direct TV Recording
continues.
After pressing the DIRECT REC button Q to start
recording, select on your TV the programme position of
the TV programme that you want to view.
3 Press the Stop button F to stop recording.
IN
VIDEO
L
R
AUDIO
OUT
RF
OUT
IN
(
AV1
)
AV1 (VIDEO IN b / AUDIO IN d)
Audio/Video Output Socket of TV
20:15.54
16.OCT.2005
On Screen Display
Operations
1 Set [OSD REC] to [ON] (see page 13).
2 Press the REC(REC/OTR)
buttons I (Z).
3 Press the Stop button F to
stop recording.
Note:
– This function is also activated for Direct TV Recording,
OTR Recording and Timer Recording.
Recording of Stereo or Bilingual
Programmes (For NV-FJ735AM only)
1 Recording is automatically made in the stereo or bilingual
mode. This prevents errors in the selection of the dubbed
or the original language.
2 During playback press the AUDIO button ? to select the
desired sound mode. (See page 12.)
The NICAM Broadcast System
(For NV-FJ735AM only)
NV-FJ735AM is equipped with the NICAM sound system.
NICAM is a 2 channel sound broadcast system to provide
either a high quality stereo sound track or 2 independent
MONO sound tracks, M1 and M2.
NICAM programmes are always accompanied by standard
sound broadcasts and you can select the desired sound with
the AUDIO button ? during playback.
– The NICAM digital stereo sound can only be recorded on
the Hi-Fi audio track.
– When NICAM programme is being received, the indicators
are lit to inform you of the type of broadcast. (See page 12.)
– To record the regular sound (ordinary normal sound) on the
FM audio tracks when a NICAM programme is received, set
[MONAURAL] to [ON]. (See page 13.)
– To hear stereo performance connect as shown on page 5
to a TV or Stereo Amplifier with left and right audio inputs.
Important Note for the NICAM System
When NV-FJ735AM is switched on, the tuner will
automatically switch to a NICAM broadcast, if NICAM is being
transmitted.
At this time the NICAM signal is transmitted on stereo
channels only, since the M1 and M2 formats are not yet
available. Even if the sound track is MONO, the stereo
indicator will appear.
To recorded on same screen a picture, the
present date and time (OSD Recording)
This function allows the picture which you want to record on
the video tape, the present date and time are recorded on the
same screen.