Filter
Top Products
8
LSQT0869
4 Tape running display
5 Present time/Tape counter/Remaining tape time/Index
Search/OTR indication/JET Rewind
6 Tape Mode/Rec Mode indicator (SP/LP/EP)
7 Cassette-in indicator
8 Colour system indicator
Any selected colour TV system except [AUTO] appears on
screen display. See the “To Set the Colour TV System”
(See page 7).
9 NAVI CHECK indicator
During playback, press the [STATUS/ NAVI CHECK] (32)
repeatedly until the NAVI CHECK indicator appears. You
can check the property of the programme being played.
However, this function is effective only for programmes
recorded with setting the [JET NAVIGATOR] to [ON].
(See to the right.)
Clock # Counter # Remaining Tape Time #
# NAVI CHECK indicator # Clock
• When the VCR is checking the programme data, the
message [CHECKING DATA] is displayed.
• When the programme data cannot be found, the
message [DATA NOT FOUND] appears.
Note:
• The On Screen Display may be disturbed or disappeared
during special playback.
Option Setting
1 Press [MENU] (9) to display the Main menu on the TV
screen.
2 Press [43] (28) to select [OPTION] then press
[ENTER] (26).
3 Press [43] (28) to select the desired field.
TAPE SELECT: To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
•Press [21] (28) to select the corresponding video
cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
• The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT:To select the colour TV system
used to record NTSC signals.
•Press [21] (28) to select [AUTO]. Allows NTSC [4.43]
or [3.58] signals to be distinguished automatically.
• If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
• Some programmes on NTSC 3.58 system cannot be
recorded correctly by selecting [3.58].
NTSC PB SELECT: To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
•Press [21] (28) to select the desired position according
to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
JET NAVIGATOR: To set the conditions for the Jet
Navigator Function.
•Press [21] (28) to select [ON] or [OFF].
OFF: Initially set at this position.
ON: Jet Navigator function works. If you select [ON],
[OSD REC] is set to [OFF] automatically.
DELETE NAVIDATA: To delete all the Jet Navigator data
stored in the VCR memory.
•Press [21] (28) to select [ENTER] then press [ENTER]
(26) to do the deletion.
NO: Initially set at this position.
ENTER: It is done to delete all the Jet Navigator data.
Stop, Eject
Rewind, Review,
Index Search:,
Jet Search6,
Jet Rewind
6
Fast Forward, Cue,
Index Search 9,
Jet Search 5
5
Playback 1
Recording ¥
Recording pause ;¥
Repeat playback R1
Information Display
Present time 17:24
Tape counter 0:02.54
Remaining tape time REMAIN 2:34
Index Search S 01
OTR indication OTR 60
JET Rewind J . REW
MENU
SELECT
END
: , ENTER
:MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
TAPE REFRESH
NAVI MEMORY
0PROG.
END :MENU
TAPE SELECT
[AUTO]
NTSC INPUT SELECT [AUTO]
NTSC PB SELECT [onPALTV]
JET NAVIGATOR [OFF]
DELETE NAVIDATA [NO]
OSD REC [OFF]
OSD [AUTO]
MONAURAL [OFF]
SELECT:
OPTION
LSQT0869.book 8 ページ ２００５年２月２３日 水曜日 午後８時４７分