Filter
Top Products
1. EPJ (Earphone) Jack - Plug an earphone or monaural headphones with an 1/8 miniplug into
this jack for private listening.
2. Remote Sensor - Signals from the Remote Control unit are received here.
3. POWER - Press to turn the TV on or off.
4. VOLUME
/ - Press to raise or lower the level of the sound. And also, press to select the
desired setting during On-Screen operations.
ACTION - Press to display the On-screen menu function. And also, press to enter or select
information for On-Screen operations.
5. CHANNEL ▲ / ▼ - Press to select a higher or lower numbered channel set into memory. And
also, press to select the desired setting during On-Screen operations.
6. AUDIO/VIDEO IN Jacks - Audio and video signal cables from an external source can be
connected here.
NOTE:
If needed customer can enter the OSD by pressing VOLUME
and of the front panel at the
same time.
EPJ POWER VOLUME
ACTION
CHANNEL VIDEO IN AUDIO IN
LOCATION OF CONTROLS CLOSED CAPTION
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display Closed Captioned television programs.
Closed Captioning will display text on the screen for hearing impaired viewers or it will
translate and display text in another language.
TO VIEW CLOSED CAPTIONS
• When activating the Closed Captioned Decoder, there will be a short delay before the
Closed Captioned text appears on the screen.
• Closed Captioned text is only displayed in locations where it is available.
• If no caption signal is received, no captions will appear, but the television will remain in
the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning.
This is normal with Closed Captioning, especially with live programs. This is because
during live programs, captions are also entered live. These transmissions do not allow
time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may
not be seen or may interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed
Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder
may not appear or may appear with strange characters or misspelled words. In this case,
adjust the antenna for better reception or use an outdoor antenna.
Press ACTION.
Press ▼ to select the LOCK mode, then press ACTION.
Enter your password (4 digits) using Direct channel selection (0-9).
In the event of entering an incorrect password, press
or wait a few seconds to delete
the wrong password.
Enter the same password for confirmation only for the first time.
Press ▲ or ▼ to select the V-CHIP option, then press
.
Press
or to select the ON, then press ACTION.
Press ▲ or ▼ to select the TV RATING or MOVIE RATING option, then press
.
Press or to select the desired rating for the applicable video or TV channel, then
press ACTION.
1
5
8
Press ACTION twice.
TV-Y
TV-Y7
TV-G
: all children
: 7 years old and above
: children’s program
TV-PG
TV-14
TV-MA
: parental guidance
: 14 years old and above
: 17 years old and above
6
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to explain the rating.
Press
▲
or
▼
to select the desired rating you want. Press to select the setting ON or OFF,
then press ACTION.
: all ages
: parental guidance
: parental guidance
for under 13 years old
G
PG
PG-13
R
NC-17
X
SETTING LOCK
This TV is fitted with a V-CHIP controller which provides you with channel viewing access controls
and restrictions. This function allows adult screening of TV programs based upon ratings.
OFF
TV-Y7 TV-G TV-14 TV-MA
TV–Y TV-PG
TV RATING
4
3
2
MOVIE RATING
OFF
PG PG-13 R NC-17 XG
: Parental guidance for under 17
years old
: 17 years old and above
: adult only
7
412
Press ACTION and press to select the SET UP mode,
then press ACTION.
Press ▲ to select CC mode and then press , then press ▲ or ▼
to select desired Closed Caption (e.g. CAPTION CH1), then press
ACTION.
Press ACTION twice.
3
1
2
Captions: This Closed Caption Mode will display text on the screen in English or another
language (depending on the setting of the Closed Captions ). Generally, Closed Captions in
English are transmitted on Captions Channel 1 and Closed Captions in other languages are
transmitted on Captions Channel 2.
Text: The Text Closed Caption Mode will usually fill 1/2 of full screen with a programming
schedule or other information. After selecting a Closed Caption Mode, it will stay in effect until
it is changed, even if the channel is changed. If the Captions signal is lost due to a commercial
or a break in the signal, the Captions will reappear when the signal is received again. If the
channels are changed, the Captions will be delayed approximately 10 seconds.
For television programs broadcasting with Closed Captions, look in your TV guide for the
Closed Captions symbol (CC).
NOTES:
•
If you forget your password, turn on the TV. Reduce the volume to a minium level. Press and
hold VOLUME on the front of the TV and press the 0 button on the remote control
simultaneously. Select the LOCK mode, then enter a new password.
•
If you want to change the password, follow steps 1-3 and select the "CHANGE PASSWORD"
option then enter your new password.
• The V-Chip function is activated only on programs and tapes that have the rating signal.
• Once you block a program using the V-Chip function, the blocked program cannot be watched
based on the content of the show. When the program starts, the "INPUT PASSWORD" will
appear on the screen. When you want to release the V-Chip temporarily, enter the password.
If you change the channel or turn off the TV while the V-Chip function was temporarily
released, the original setting will be resumed. If you return to the channel you were watching
you must re-enter your password to temporarily release your V-Chip function again.
• If you are changing channels using a VCR or a cable box, while the TV remains on channel
3 or 4, the V-Chip operates differently. When you enter your password to temporarily
release the block on any channel, you have completely disabled the V-Chip function for all
stations. To reset the V-Chip turn your TV off and back on.
• Some cable boxes are built with a delay feature, in some cases it can take up to 10 seconds
for a program to appear after the password has been input.
3 5 6
CATV mode direct channel selection
When the TV/CATV menu option is in the CATV position, channels can be selected as
follows:
NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language,
but the Closed Caption text will not be affected by the language selection.
To turn on the TV, press POWER.
The VOLUME can be adjusted to a desired level by pressing VOL (VOLUME) or .
The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER.
As the sound level increases, so do the number of BARS AND THE NUMBER on the
screen. The same is true for decreasing the level.
Set the TV/CATV menu option to the appropriate position. When shipped from the
factory, this menu option is in the CATV setting. See "To Memorize Channels".
NOTE: If the station being viewed stops broadcasting, the TV will automatically shut off
after 15 minutes.
TV OPERATION
1
2
TV - VHF/UHF channels
CABLE - CABLE TV channels
3
4
1-9
10-12
13-99
100-125
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press "002".
Press "0", then remaining 2 digits.
Example, to select channel 12, press "012".
Press the 2 digits in order.
Example, to select channel 36, press "36".
Press the 3 digits in order.
Example, to select channel 120, press "120".
4
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
/ACTION
/
Press ACTION.
Press to select the SET UP mode, then press ACTION.
Press and then press ▲ or ▼ to select desired language
(e.g. English), then press ACTION.
Press ACTION to select the EXIT mode, then press
ACTION again.
3
1
2
SETTING LANGUAGE
CH (CHANNEL) ▲ and ▼
Press and release the CH (CHANNEL) ▲ or ▼ . The channel automatically stops at the
next channel set into memory. Press and hold the button down to change channels more
quickly.
For proper operation, before selecting channels, they should be set into the TV's
memory. See "To Memorize Channels".
DIRECT CHANNEL SELECTION (0-9) - Press these buttons to select a channel.The
channel number will appear on the upper right corner of the TV screen. If an invalid
channel number is selected, the display will revert to the previous channel.
TV MODE DIRECT CHANNEL SELECTION - When the TV/CATV menu option is in the
TV position, all channels can be instantly selected by using two buttons (For example, to
select channel 2, press "0", then "2". If you press only "2", channel selection will be
delayed for a few seconds). For channels 10 and above, press the 2 digits in order.
This TV can display the channel number, on screen displays and picture adjustments on the
screen in English, Spanish or French.
NOTE:
All four arrows can be used to select the SET UP mode, not just .
3M11001B-E 5/15/03, 4:35 PM4