Filter
Top Products
RQT6549
Basic operations
11
Replaying a scene—QUICK REPLAY
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Skip back a few seconds within the current item (program, track or title).
During play
Press [QUICK REPLAY].
[Note]
This feature may not work while playing some parts of a disc or at all with
some discs.
Starting play from a selected item
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Press the numbered buttons to select the item.
To select a 2-digit number
e.g. 23: [S10] ➡ [2] ➡ [3].
[WMA] [MP3]
Press [ENTER] after pressing the numbered buttons. (You do not have to
press [S10].)
Play starts from the selected item.
[Note]
≥This works only when stopped with some discs.
≥When playing DVD-Audio and you want to start play from a track in a
different group, select the group first (➡ page 12).
Setting the unit to turn off—SLEEP timer
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Press [SLEEP] to select the setting.
Each time you press the button:
OFF #AUTO
§
#60 min #90 min #120 min
^————————————————}
§
The unit turns off 5 minutes after play
finishes.
To cancel the SLEEP timer
Press [SLEEP] to select “OFF”.
To confirm the remaining time
Press [SLEEP].
[Note]
≥AUTO also works with DVDs that show a menu after play finishes.
≥AUTO does not work if you press [∫], [MENU] or [TOP MENU]. It is
activated again when you restart play.
≥AUTO does not work correctly with some discs (e.g., if menus appear
after playing Video CDs).
∫ Auto standby
The unit switches to standby mode after about 30 minutes in the stop
mode, irrespective of the SLEEP setting.
D.MIX
C DBM
PG
RMTR
TTL
GRP
TRCK
CHAP
D.N.R.
DVD-
A
VR
CD
WMA
MP3
A.ONLY
PROG. SLEEP
A B RNDPGM
A
Press PLAY to Chapter Review
Press PLAY to Preview Chapters
The unit turns off after
60 minutes.
60 min
Z
Z
D.MIX
C DBM
PGRMTRTTL GRP
TRCK CHAP
D.N.R.
DVD-
A
VR
CD
WMA
MP3
A.ONLY
PROG. SLEEP
AB RNDPGM
A
Position memorized
Light as you memorize positions.
Resume function
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
(When the elapsed play time is displayed)
The position you stopped play at is recorded by the unit when “!” is
flashing on the display.
While “!” is flashing, press [1] (PLAY) to start play from where you
stopped it. (When playing DVD-Video ➡ Chapter Preview below)
≥The position is cleared when the disc tray is opened or the unit is
switched to standby.
To clear the position
Press [∫] before recalling the memorized position.
Position Memory function
This function allows you to memorize a position to start from even after
switching the unit to standby or changing discs. You can memorize
positions on up to five different discs at a time. When you memorize
another position, the earliest position is replaced.
≥This function does not work while playing some DVDs or play lists on
DVD-RAM.
1. During play, press [POSITION MEMORY].
2. Press [POWER Í] to switch the unit to standby or press [<] to remove
the disc.
3. When you are ready to play the disc again, press [1] (PLAY).
Play starts from the memorized position and the position is cleared.
(When playing DVD-Video ➡ Chapter Preview below)
To clear the position
Press [∫] before recalling the memorized position.
Chapter Preview [DVD-V]
One of these messages appears immediately after you press [1] (PLAY).
Press [1] (PLAY) while the message is displayed and the beginning
portions of each chapter up to the current one are played. Full play
resumes from the point where you pressed [∫] or [POSITION MEMORY].
(This feature works only within a title.)
If you do not press [1] (PLAY), the message disappears and play starts
from where you pressed [∫] or [POSITION MEMORY].
[WMA] : for U.S.A. and Canada only