Filter
Top Products
MENU OPERATIONS
25 z
ENGLISH
Photo Viewer™ Operations (Cont.)
Photo Viewer™ Setup Menu
This menu allows you to customize features in the Photo
Viewer™ Setup menu.
Procedure
• Highlight Photo Viewer™ icon and press OK button to
display the thumbnail screen.
• Press the SD button on the remote control to display the
Setup screen.
•Use the CH, VOL or VOL keys to navigate in
the setup menu.
Slide Show - Allows you to start the slide show by pressing
the OK button while Start is highlighted. Press OK button to
stop the Slide Show.
Note: When you are in the Slide Show mode, you can change
the Aspect of the image on screen by pressing the
ASPECT button on the remote control.
Interval - Allows you to change the length of time that a slide
is being displayed on screen. Available settings are: 5sec,
10sec, 15sec, 30sec, 60sec, 90sec and 10 minutes.
Sequence - Select either Order or Random.
Repeat - Select Off or On.
Note: After setting Interval, Sequence or Repeat, press CH
button to select Start, then press OK to start the Slide
Show.
Rotate - Allows you to rotate the image.
Zoom - Lets you select the magnification of the Single Slide
display.
Procedure
• While in the Single Slide display mode, press SD button
to display Photo Viewer™ Setup Menu. Zoom option will
be displayed in the Setup Menu.
• Highlight Zoom and press OK button.
• Press VOL or VOL button to select To Fit, x2 or x4.
• Press OK button. To move the image in the picture
frame, press the navigation buttons.
• Press OK to view the slide in normal magnification.
Card - Select either SD or PC when both cards are inserted in
the slots.
Following are some of the error messages that may be displayed
on-screen when certain conditions are not met or exceeds the
Photo Viewer™ specifications.
Notes:
• If thumbnail screen or a single slide image is displayed
for longer than 10 minutes, Image shift (refer to page 26)
feature will be activated to prevent image retention. The
image on-screen will zoom-in and zoom-out in 4 (four)
steps.To exit this mode, press OK button or select
another slide or press any button.
• During the Slide show, the Image shift feature will
activate if the image is displayed longer than 5 (five)
minutes. The image will be shifted horizontally (left or
right) in minute increments. Image shift feature will not
activate, if it is turned Off.
Setup Menu
Return
Interval
5Sec
Sequence Order
Slide Show Start
Repeat OFF
Rotate
Left
Card SD
100-001 0001/0066
EXIT
SELECT
CHANGE
OK
: 07/04/2002
: 1600 x 2000
Date
Pixel
Error messages
Error condition
Error messages displayed
on-screen
When inserting Card
No card or Card is not inserted
correctly
If the JPEG file is corrupted
and cannot be decoded.
This type of image is not supported.
If the card is not formatted with
FAT 12 or FAT 16 or if it is not
DCF standard.
This type of format is not supported.
If thumbnail and main picture
cannot be shown
Over 3000 image files
Photo Viewer™ cannot support over
3000 JPEG files.
Resolution over
Photo Viewer™ cannot support over
8192 x 8192 pixels.
If incompatible card is inserted This type of card is not supported.
Photo Viewer™ Troubleshooting
Symptoms Solutions
Cannot read the content of
the card
A ) Not com patibl e for mat. Must be
formatted with FAT 12 or FAT 16.
B) The extension is not “JPG”.
Photo Viewer™ can display EXIF
standard JPEG file, and JPEG
file which is not EXIF standard
cannot be shown.
C) The folders not under DCF
standard.
PC card cannot be ejected
Push the card all the way in, and
eject.
Poor picture quality
If the main image cannot be read
(the file is partially corrupted), the
Photo viewer™ will read the
thumbnail. Please confirm the
format of the image.
Long time to display
It will take long time to display, if
there are lots of images or if the file
size is big.
This icon will appear where
thumbnail image will.