Filter
Top Products
24
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
24
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Search System is ...
Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are
made, program index and information are also included. These index marks can be used to access or
scan recordings.
1
Press SEARCH in
Playback or Stop
mode to display
INDEX SEARCH
screen, and then
press number keys
to select the recording
number.
• To calculate number, see
below.
Press FF or REW to
start search.
Index Search
Go directly to the desired recording.
2
Play begins at
search end.
To search forward
or back 1 index,
press FF or REW
while screen
left in displayed
(10 sec.).
ENTER
I
NDEX
NUMBER
:
1
US
I
NG 1
-
9
KEYS
FOR
W
ARD
SEARCH
:
FF
REVERSE SEARCH
:
REW
EX
I
T
:
SEARCH
I
NDEX SEARCH
FOR
W
ARD
SEARCH
:
FF
REVERSE SEARCH
:
REW
I
NDEX SEARCH
• Make each entry within 10 seconds, or the Index Search
mode will be canceled.
• If Index Search is started very close to an index mark, that
index mark may not be counted in the search.
Notes
NOTE: indicates start points of each recording.
■
To calculate the Index Number
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
6157
2
34
17534 6
2
To cancel, press
PLAY.
Tape Operation
VIDEO INAUDIO IN
POWER VOL CH
STOP/EJECTREW/
PLAY/REPEAT
FF/ RECTIMER/FM
ACTION
RECON TIMER
PROG TIMER
REW
FF
SEARCH
FF
REW
NUMBER Keys
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.