Filter
Top Products
19
8
The Hard Disk Recorder calls the ReplayTV Service
to retrieve local telephone numbers and TV channels.
• You are notified of the progress of the connection, and if any
errors occur during the connection.
• This connection to the ReplayTV Service lasts about 5 minutes.
• The internal Hard Disk Recorder clock and time zone are set
during this connection.
• This connection also provides the Hard Disk Recorder with TV
channel information for your local area.
PLAY
REW
Continued on the next page.
9
Press
/
to select
your local number, then
press PLAY to move to
the next screen.
• The ReplayTV Service
finds local phone numbers
based on the information
you provided.
• You can change the number later by pressing MENU and
selecting “Setup” and then “Change Dialing & Input Settings.”
If the connection failed,
Press PLAY to try connecting again.
Or, press REW repeatedly to return to the previous screen and
confirm each setting item. Then, re-enter the correct information.
10
Press
/
to select
the dialing method, then
press PLAY to move to
the next screen.
• Choose the dialing method
for your area. For example,
a direct call, or if you need
to dial a prefix and/or area
code.
11
Press
/
to select
the device you have
connected to the LINE
1 input, then press
PLAY to move to the
next screen.
• If nothing is connected to
LINE 1, just press PLAY.
/
buttons
7
Press Number buttons
to enter the dialing prefix,
then press PLAY to
move to the next screen.
• Press DISPLAY for *;
press ENTER for #; and
press PAUSE for ,.
• Some telephone systems must dial a special number prior to
placing a phone call, to disable call waiting for example. If your
phone system requires a special number, enter it on this screen.
Number
buttons
7
ENTER
PAUSE
DISPLAY
9
10
11
7
9
10
11
If you select any components, the setup screen appears.
Refer to “Completing the IR Blaster Setup” section on page 21.
• “Other” is reserved for future devices
that may be connected to the Hard
Disk Recorder.
NOTE
MENU
PanaHDR P01-.p65 00/12/01, 16:3719