Filter
Top Products
51
Initial settings
■ Setting TV screen aspect
Select the aspect, conventional size screen (4:3) or wide screen (16:9), when connecting to your TV set.
Press the SELECT ( , ) button to select VIDEO menu and press ENTER button.
Press the SELECT ( , )
button to select aspect item
and press ENTER button.
•
Change the password
Press the SELECT ( , ) button to select the CHANGE
PASSWORD and press ENTER button.
Input new password and press ENTER button.
Press RETURN button to exit RATINGS menu.
RETURN
ENTER
SETUP
RATINGS
CHANGE LEVEL
CHANGE PASSWORD
LEVEL 1
RETURN
ENTER
SETUP
RATINGS
2 2 2 2
ENTER A NEW
THEN PRESS ENTER.
4 - DIGIT PASSWORD.
RETURN
ENTER
SETUP
RATINGS
3 3 3 3
REMEMBER THE
CANNOT CHANGE
THE RATING LEVEL.
PASSWORD. OR YOU
16 : 9
RETURN
ENTER
SETUP
VIDEO
TV ASPECT
VIDEO MENU
RETURN
ENTER
SETUP
TV ASPECT
16 : 9
4 : 3 LETTERBOX
4 : 3 PAN&SCAN
1
2
3
1
2
"16:9": Select when a wide screen TV set is connected. (Factory preset)
Select this if the disc video type is 16:9. (For wide screen TV's,
set the screen mode to "Full".)
"4:3 LETTERBOX":
Select when a conventional TV set is connected.
Wide video with an aspect ratio like 16:9 is played back
on the screen with black bands on the top and bottom.
"4:3 PAN&SCAN": Select when a conventional TV set is connected.
Wide video with an aspect ratio like 16:9 is played back
on the screen with either both sides or one side cut off.
• If Pan & Scan or Letterbox is designated
beforehand on the disc side, the disc designation
takes priority.