Filter
Top Products
52
Initial settings
■ Setting on screen DISPLAY
Press the SELECT ( , ) button to select DISPLAY menu .
Press the SELECT ( , ) button to select each item and press ENTER button.
DISPLAY MENU
ENGLISH
POS 1
ON
RETURN
ENTER
SETUP
DISPLAY
MENU LANGUAGE
OSD POSITION
OSD MESSAGES
RETURN
ENTER
SETUP
MENU LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
RETURN
ENTER
SETUP
OSD POSITION
POS 1
POS 2
RETURN
ENTER
SET UP
OSD MESSAGES
ON
OFF
RETURN
ENTER
SETUP
OSD MESSAGES
ON
OFF
■ Setting AUDIO [DVD]
Press the SELECT ( , ) button to select AUDIO menu .
Press the SELECT ( , ) button to select each item and press ENTER button.
AUDIO MENU
OFF
STANDARD
ON
RETURN
ENTER
SETUP
AUDIO
DIGITAL AUDIO OUT
D. RANGE COMPRESS.
AUDIO DURING SRCH
RETURN
ENTER
SETUP
DIGITAL AUDIO
OUT
OFF
BITSTREAM
LPCM
1
2
1
2
You can change the language used for the on screen display
menus.
ENGLISH: SELECTED as onscreen language.
FRANÇAIS: SELECTED as onscreen language.
ESPAÑOL: SELECTED as onscreen language.
POS 1: Display appears at the position on the top side of the
screen.
POS 2: Relative to "Position 1", the display appears at the
bottom.
(Select this for example, when part of the display is
missing.)
This is used to turn the display of functions like "PLAY" and
"STOP" on or off.
ON: Functions like "PLAY" and "STOP" are displayed on
the television screen.
OFF: Functions like "PLAY" and "STOP" are not displayed
on the television screen.
Digital audio output setting
• This is for selecting the type of digital audio signal output from
the optical digital audio output terminal of this device,
according to the connection method with other equipment.
OFF: For analog connection of audio output ➠ Set to "OFF".
BITSTREAM: When connecting with digital equipment with a
built-in Dolby digital decoder or DTS decoder ➠
Set to "BITSTREAM".
LPCM:
When connecting with digital equipment without a built-in
Dolby digital decoder or DTS decoder ➠ Set to "LPCM".
When playing back a DVD recorded at LPCM 96 kHz using 96 kHz
sampling, perform analog connection by setting to "OFF". Optical
digital output is not compatible in this case. (When "BITSTREAM" or
"LPCM" is selected, downsampling to 48 kHz is done for both optical
digital output and analog output.)
CAUTION:
• When performing digital connection with equipment without a
built-in Dolby digital decoder or DTS decoder, be sure to set
to "LPCM".
• If setting is not done correctly, noise will be generated, and
this may hurt your ears or damage speakers.
•
To return to the previous screen, press RETURN button.
•
To return to the previous screen, press RETURN button.
See next page
See next page