Filter
Top Products
20
Operating Peripheral Equipment
You can operate other manufacturers’ equipments using this TV’s remote control.
Connect the external equipments to the TV and
Power Off the external equipments
Press both buttons simultaneously
for more than 3 seconds.
•
Release the buttons when the equipment selection
buttons start flashing.
Select the equipment
with the equipment selection button
•
The selected button remains lit (other buttons are not
lit).
Input the equipment’s 4-digit remote
control code
(p. 37-38)
Operate the equipment with the
remote control
(p. 36)
•
The external equipment turns On.
■
If the equipment does not operate with
remote control
•
When your equipment has a single code
Input the remote control code again
•
When your equipment has multiple codes
Change the code with above and test again
•
Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
To find a code not listed in the code list
This procedure searches all codes and is called the “sequence method.”
Caution
After step above, change the code and
test
When the correct code is found
store
Operate the equipment with the
remote control (p. 36)
•
Repeat until the code is found
•
It may take many attempts before the correct
code is found
change
4
1
2
3
5
+