Panasonic PT-52LCX16 Projection Television User Manual


 
For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
58
2
3
4
Select the equipment with the
equipment selection button.
• The selected button remains lit
(other buttons are not lit).
Input the equipment’s 4-digit
Remote Control code.
(p. 60-62)
+
Operating Peripheral Equipment
1
When the correct code is
found.
You can operate other manufacturers’ components using
this unit’s Remote Control.
Connect the external devices to the Projection
Display and turn Off the external devices.
1
Press both buttons
simultaneously for more than
3 seconds.
• Release the buttons when the
equipment selection buttons
start flashing.
5
Confirm the equipment with
the Remote Control.
• The external equipment turns
On.
If the equipment does not operate with
Remote Control
• When your equipment has a single code
Input the remote control code again
• When your equipment has multiple codes
Change the code with step 4 above and test
again (p. 60-62)
Caution:
• Registration will fail if the wrong code is input or it takes more
than 30 seconds to register.
To find a code not listed in the code
list
This procedure searches all codes and is called the
“sequence method.”
After step 3 above, change the
code and test store.
• Operate the equipment with the
Remote Control. (p. 59)
• Repeat until the code is found.
• It may take many attempts
before the correct code is found.
+
2