Filter
Top Products
44
Using Web Browser Control
Error information page
When is displayed on the status information screen, click it to display the error details.
• Depending on the nature of the error, the projector may be placed in the standby mode for its own
protection.
Note
Monitor information page
Click [Projector control], then [Status information] to display the Status information page.
This page displays the projector statuses established for the items shown below.
Displays self-diagnosis information.
Displays temperature of projector’s
intake air.
Displays temperature inside the
projector.
Displays temperature around the lamp.
Displays the lamp1 lit hours.
Displays the lamp2 lit hours.
Displays the type of projector.
Displays used hours of the projector.
Displays the firmware version of the projector main unit.
OK: Normal operation
FAILED: Occurrence of trouble
Displays the input switching status.