Filter
Top Products
7
Notes on handling the SD memory card
Be sure to read the following before
using the accessory SD memory
card.
Notes on handling
Be sure to observe the following.
B Do not disassemble or modify
the card.
B Do not subject the card to
strong shocks, and do not twist
it, bend it, drop it, step on it or
immerse it in liquids.
B Do not rub the card with cloth or plastic, or bring it close to objects which
may generate static charges or magnetic fields.
B Do not touch the metal terminals with hands or metal objects, attach
stickers to them, or allow them to become contaminated in any way.
B Do not remove the attached label from the card.
B Do not attach any other labels or stickers to the card.
Notes on storage
After removing the SD memory card from the projector or other device,
always insert it into its protective case.
B Do no leave the card inside hot vehicles or in other places with high
temperatures such as places exposed to direct sunlight.
B Do not leave the card in places which are exposed to substances such as
corrosive gases.
Protecting valuable data
B Do not turn off the projector power supply or remove the SD memory card
from the projector while the card is being accessed for reading or writing
(while the SD memory card access indicator inside the card slot cover at
the rear of the projector is flashing). Failure to observe this may result in
loss of data.
B Always make a backup of the data which is stored in the SD memory card.
Accidental mistakes in using the card may sometimes result in the loss of
valuable data.
16
MB
LOCK
Front
Rear
Write-protect switch