Filter
Top Products
3
4
4
If "ERROR" is displayed
2
(Example: When “DVD” is selected) (Example: When “DVD” is selected)
To finish, press "SETUP".To finish, press "SETUP".
(
(
Press "ENTER"
Deleting home theatre equipment
remote control signals
You can use one of two methods to delete remote control signals that have been learnt, either by
deleting the settings one by one (DELETE) or by deleting all of the settings at once (OPS RESET).
Deleting settings for each button one
by one (DELETE)
Deleting settings all at once
(OPS RESET)
1
Press "DEVICE", use the tilt button to
select the device, and then press "ENTER".
Use the tilt button to select "DELETE?",
and then press "ENTER"
Press the button to be deleted.
3
Use the tilt button to select "OPS RESET?",
and then press "ENTER".
Press "LEARN" for 3 seconds or more.
2
Press "LEARN" for 3 seconds or more.
1
Press "DEVICE", use the tilt button to
select the device, and then press "ENTER".
If no signals have been learned, "ERROR" will be displayed.
To delete another learnt signal, repeat step 4.
Example: When deleting the signal
learnt for the "PLAY" button.
ENGLISH - 9