Filter
Top Products
9
Audio/Video
Input Connector 2
(LINE 2)
p. 35
CHANNEL /
TRACKING/V-LOCK
pp. 4, 21
POWER
OPEN/CLOSE
p.
22
STOP/EJECT
p. 20
Light-up
Indicators
p. 11
REC
p. 21
Disc Tray
Cassette
Compartment
PLAY
p. 20
Remote
Sensor
Front View of DECK
STOP
p.
22
Bold: VCR Function
Italic
:
DVD Function
Bold Italic
:
VCR and DVD Functions
Normal: Others
PLAY
p.
22
If the disc cannot be removed...
First, unplug DECK. Then, prepare a rigid
wire (e.g. an extended paper clip) and,
applying moderate force, insert it straight
into the hole at the base of the tray.
The tray will eject a little. Now, pull the tray
all the way out and remove the disc.
Over 2 inches
Returns to factory setting. Use if relocating DECK, or if Initial Setup needs to be redone.
• Make sure a tape is not inserted in the DECK.
Reset All Memory Functions
Press and hold both VCR PLAY
and CHANNEL on the DECK for
more than 5 seconds.
• The power shuts off.
Turn DECK Power on.
3
Perform “Initial Setup (Ready to Play)”
on page 16.
2
1
21
Initial Setup
REWIND
/
SEARCH
/
SKIP
p. 20,
23
FAST FORWARD
/
SEARCH
/
SKIP
p. 20,
23