Filter
Top Products
Getting Started
31
Setting the clock
Setting the clock
You must set the time and date on the VCR to
use the timer features properly. If the VCR
clock was not set in the Auto Set Up
procedure, you need to set it manually.
The Auto Clock Set function (not available
on SLV-SE600B) works only if a station in
your area is broadcasting a time signal. If the
Auto Set Up function did not set the clock
correctly for your local area, try another
station for the Auto Clock Set function.
Setting the clock manually
Before you start…
• Turn on the VCR and the TV.
• Set the TV to the video channel.
1
Press MENU, then press M/m to highlight
REGLAGES and press OK.
2
Press M/m to highlight HORLOGE, then
press OK.
0
MENU
M/m/,
OK
MENU
OK
LECTURE
MENU:
REGLAGES
RETOUR
REGLAGE DES CHAINES
HORLOGE
LANGUE
:
:
OKREGLER
SELECTIONNER
SORTIE
OK
LECTURE
MENU:
HORLOGE
NONREGLAGE AUTO
CHAINE D’HORLOGE
REGLAGE MANUEL
:
OK:REGLER
SELECTIONNER
SORTIE
.1 1.2000 SAM 0:00
continued