Filter
Top Products
54
Recording TV programmes using the ShowView system (not available on SLV-SE600B)
1
Press MINUTERIE.
• When you set OPTIONS PROGRAMM.
to MIXTE:
The METHODE DE
PROGRAMMATION menu appears on
the TV screen. Press M/m to select
SHOWVIEW, then press OK.
• When you set OPTIONS PROGRAMM.
to SHOWVIEW:
The SHOWVIEW menu appears on the
TV screen.
2
Press the programme number buttons to
enter the ShowView number.
If you make a mistake, press ANNUL/0
and re-enter the correct number.
3
Press OK.
The date, start and stop times, programme
position or station name, tape speed, and
VPS/PDC setting appear on the TV screen.
If “– –” appears in the “PROG.”
(programme) column (this may happen for
local broadcasts), you have to set the
appropriate programme position manually.
Press M/m to select the desired programme
position.
To record from a decoder or other source connected to one or more of the
LINE inputs, press CHOIX ENTREE to display the connected line in the
“PROG.” position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press ANNUL/0 to cancel the setting.
MINUTERIE
OK
LECTURE
REGLER :
SELECTIONNER :
OK
MENU:
METHODE DE PROGRAMMATION
NORMALE
SHOWVIEW
SORTIE
MENU:
SHOWVIEW
REGLER
–
:
0–9
N° SHOWVIEW
––––––– –
JEU28.9
SORTIE
123
456
789
0
ANNUL/0
MENU:
SHOWVIEW
REGLER
N° SHOWVIEW
–1246––– –
JEU28.9
SORTIE
ANNULER
:
0–9
:
OK:CONFIRMER
ANNUL / 0
ANNUL/0
OK
LECTURE
CHOIX
ENTREE
519:00 20:00 3
DATE
ANNULER
REGLER
:
:
SELECTIONNER :
ANNUL / 0
MENUSORTIE :
MINUTERIE
SP / LP
LISTE
HEURE PROG.
SP VPS / PDC NON
JEU28.9
AUJOURD.