Filter
Top Products
Accessories / Options
11
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
(42” / 50” class) or (65” class) from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
from the cover.
4 Pull out the cover.
5 Remove the assembly screws
from the bracket.
6 Remove the assembly screws from the Back of stand and pull out the neck.
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
(View from the top)
∗
(42” class)
15°
(50” class)
10°
Preventing the TV from falling over (42” / 50” class)
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
Screw (not supplied)
Diametre: 3 mm
Length: 25-30 mm
Screw hole