Viewing 3D images
31
Part names and functions
Power switch
Slide the tab to the “ON” / “OFF” position to switch the power On /
Off.
Each time slide the tab to the “MODE” position to change the mode
between 3D and 2D (view a 3D image in 2D).
Registration
(p. 32)
Indicator lamp
Lights or flashes during use to show the status.
Battery cover
●
When using for the first time, remove the insulating sheet. Pull the
insulating sheet.
●
To replace the battery “Replacing the battery” (p. 33)
Insulating sheet
Pull
■ Indicator lamp status
Indicator lamp Status
Lights red for 2 seconds when turned on Sufficient battery level
Flashes 5 times when turned on Low battery level
Flashes red and green alternately Under pairing
Flashes green once every 2 seconds Under reconnecting to the TV
Lights green for 3 seconds Pairing or reconnecting is successfully completed.
Flashes red 3 times
Automatically power off (Pairing or connecting fails or
connection is lost)
Flashes red once every 2 seconds when in use 3D mode is selected
Flashes red twice every 4 seconds when in use 2D mode is selected