Filter
Top Products
17
Menu
Item Adjustments/Configurations (alternatives)
Setup
Channel surf mode
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital only/Analog only)
•
Favorite: Only channels registered as FAVORITE
Language
Selects the screen menu language
Clock
Adjusts the clock
ANT/Cable setup
Sets channels
Connected
devices
Input labels
Selects the terminal and label of the external equipment
Anti Image retention
Pixel orbiter
Prevents “Image retention” with Wobbling. (Automatic/Periodic)
•
Automatic: Shifts the display image automatically.
•
Periodic: Shifts the display image every (1/2/3/4) minutes according to what was set in the
“Time (minutes)” menu.
Time (minutes)
Sets the time for “Pixel orbiter-Periodic” setting. (1/2/3/4)
4:3 side bars
Change the brightness of the side bar (Off/Dark/Mid/Bright) (4:3 mode only)
•
The recommended setting is “Bright” to prevent panel “Image retention”.
Scrolling bar
Press “OK” to start horizontal “Scrolling” on the screen
VIERA Link settings
VIERA Link
Controls equipment connected to HDMI terminals (On/Off)
•
“Power off link”, “Power on link”, “Stand-by power save”, “Auto power stand-by” and “Default
speakers” cannot be selected if “Off” is set.
Power on link
Sets “Power on link” of HDMI connection equipment (Yes/No)
Power off link
Sets “Power off link” of HDMI connection equipment (Yes/No)
Stand-by power
save
Set “Stand-by power save” of HDMI connection equipment. (No/Yes)
Auto power
stand-by
Set “Auto power stand-by” of HDMI connection equipment.
(No/Yes (with reminder)/Yes (no reminder)
Default
speakers
Selects the default speakers (TV/Theater)
ECO/power saving
No signal for 10
minutes
To conserve energy, the TV automatically turns off when NO SIGNAL and NO OPERATION is
performed for more than 10 minutes. (Enable/Disable)
Note
•
Not in use when setting “Auto power on”, “On/Off Timer”, “Lock”, “SD mode” or Digital
channel.
•
“No signal for 10 minutes was activated” will be displayed for about 10 seconds when the
TV is turned on for the first time after turning the power off by “No signal for 10 minutes”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
No activity for 3
hours
To conserve energy, the TV automatically turns off when no operation of remote or side panel
key continues for more than 3 hours. (Enable/Disable)
Note
•
Not in use when setting “Auto power on” or “On/Off Timer”.
•
“No activity for 3 hours was activated” will be displayed for about 10 seconds when the TV is
turned on for the first time after turning the power off by “No activity for 3 hours”.
•
The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining minutes
prior to the shut-off.
Advanced
setup
Auto power on
Turns TV On automatically when the cable box or a connected device is turned On (No/Yes)
TV AC cord must be plugged into this device. TV comes on every time the power is restored.
•
The “Sleep” timer, “On / Off timer”, and “First time setup” will not function if “Auto power on”
is set.
Play SD card
automatically
Set “Thumbnail” or “Slideshow” to play back SD cards automatically.
(Slideshow/Thumbnail/Set later/Off)
About
Displays TV version and software license.
Reset to defaults
Performing Reset will clear all items set with Setup, such as channel settings.
Menu Item Adjustments/Configurations (alternatives)
Setup
SUB MENU
Channel surf mode
Sets the mode to select the channel with Channel up/down button
(All/Favorite/Digital only/Analog only)
Set favorite
Sets favorite channels.
Edit CH caption
Changes the station identifier.
Signal meter
Checks the signal strength if interference or freezing occurs on a digital image.
(Continued)
■
Menu list
■
Sub menu list